Laserfiche WebLink
DIVISION 0 <br /> CONDITIONS OF THE CONTRACT <br /> 00800-SUPPLEMENTARY <br /> CONDITIONS <br /> 15. ARTICLE 15 -ADDITIONAL CONDITIONS <br /> 15.1 Additional Definitions <br /> 15.1.1 Provide: As used in connection with labor, materials and equipment shall mean <br /> to furnish and install complete, including connections to utilities or service, <br /> complete anchorage and suspension, fastening or anchor devices, trim, finish <br /> and other related work,unless specified otherwise. <br /> 15.1.2 Accepted, approved, satisfactory, equal to, proper, as directed and similar terms: <br /> These shall mean the decision rests with the Architect, whose decision shall be <br /> final and binding upon the Contractor and Subcontractors. <br /> 15.1.3 Project, Work, Job: In the technical sections or on the drawings, these terms <br /> may be used interchangeably and are synonymous. They shall mean the facility, <br /> construction and/or improvement within the intent and scope of the Contract <br /> Documents. The terms shall mean the entire facility, or separable parts as <br /> appropriate to the use of the term, including that under subcontract where <br /> applicable, and includes labor, materials, equipment, services and skill. <br /> 15.1.4 Notice to Proceed: This shall be written notice by the Construction Manager to <br /> the Contractor to commence Work of the Contract, issued either before or after <br /> execution of the Contract. In issuing the Notice, stipulations may be included as <br /> to time and other requirements that may condition commencement of the Work. <br /> 15.2 Use of Drawings and Specifications <br /> 15.2.1 During construction, the Contractor shall examine and use all Specifications and <br /> Drawings for the Project, including those that may primarily pertain to other <br /> work the Contractor normally does not perform with his own forces. The <br /> Contractor shall use all of the Project Drawings and Specifications: for a <br /> complete. understanding,of the Project and the Work; to determine.the type, of <br /> construction and systems; for coordination; to determine what other work may <br /> be involved in various parts or phases; to anticipate and notify others when work <br /> will be required; and all other relevant matters related to the Project. The <br /> Contractor shall also be bound by all the requirements to complete his Work, <br /> that are applicable to, pertain to, or affect the Work, as may be shown or <br /> inferred by the entire set of Drawings and Specifications. <br /> EXISTING ORONO MIDDLE SCHOOL-NEW MEDIA CENTER SECTION 00800-24 <br /> BID PACKAGE 1: GENERAL CONSTRUCTION,MECHANICAL&ELECTRICAL <br />