Laserfiche WebLink
DIVISION 0 <br /> CONDMONS OF THE CONTRACT ' <br /> 00800-SUPPLEMENTARY <br /> CONDITIONS <br /> 1.2.6 Add Subparagraph: The general character and scope of the Work is called for <br /> by the Contract Documents. Where a portion of the Work is fully drawn and the <br /> remainder is merely indicated, the portion fully drawn shall apply to all similar <br /> parts of the Work. Drawings intended primarily as information for one trade <br /> may not necessarily show the work of other trades, which shall not be construed <br /> as there being no related materials or adjacent work. <br /> 1.2.7 Add Subparagraph: Figured dimensions shall be followed in preference to <br /> measurement by scale. In the event of discrepancies between Drawings, <br /> between Drawings and Specifications or between Specifications, the intent shall <br /> be interpreted by the Architect, which shall be binding on the Contractor. <br /> Where a dimension may be missing, the Work shall be accomplished in <br /> accordance with the directions and dimensions provided by the Architect. <br /> Dimensions on Drawings, as well as detail Drawings themselves, are subject in <br /> every case to measurements of existing, adjacent, incorporated and completed <br /> work which shall be taken by the Contractor before undertaking any work <br /> dependent upon such data. Dimensions pertaining to the Work shall be verified <br /> at site by Contractor. <br /> 1.2.8 Add Subparagraph: Where Specifications are of the abbreviated or <br /> "streamlined" type, they shall be construed as complete sentences, as shall notes <br /> on the drawings. Omission of words such as "the", "the Contractor shall", and <br /> "as shown on the drawings" is intentional. The words "shall" or "shall be" are to ' <br /> be supplied by inference. Imperative or directive instruction, directions or <br /> specifications apply and refer to the Contractor. The words "symmetrical" and <br /> "similar" are used in the general sense and need not mean "identical". <br /> 1.2.9 Add Subparagraph: Where a number is specified (as for gauges, weights, <br /> temperatures, an amount of time, and similar references) and the specified <br /> number cannot be obtained, the number shall be interpreted as the next better, as <br /> available. <br /> 2. ARTICLE 2- OWNER <br /> 2.2 Information and Services Required of the Owner <br /> 2.2.2 Add to Subparagraph by inserting at the beginning: Except as otherwise <br /> required by the Contract Documents, -- <br /> 2.4 Owner's Right to Carry Out the Work <br /> 2.4.1 Delete Subparagraph, insert instead: If the Contractor defaults or neglects to <br /> carry out the Work in accordance with the Contract Documents and fails within <br /> EXISTING ORONO MIDDLE SCHOOL-NEW MEDIA CENTER SECTION 00800-2 <br /> BID PACKAGE 1: GENERAL CONSTRUCTION,MECHANICAL&ELECTRICAL <br />