Laserfiche WebLink
D. Insulation Adhesive: Compatible adhesive recommended by insulation manufacturer to secure insulation to <br /> substrate. <br /> E. Fasteners: Corrosion-resistant fasteners as required to secure insulation to substrate. <br /> PART 3: EXECUTION <br /> 3.01 INSTALLATION <br /> A. Insu17 <br /> 1. Install snugly between framing members flush with inside face of framing. Correct any voids or depressions. <br /> 2. Cut to fit tightly around wall penetrations, blocking, bridging, electrical boxes and conduit, etc. Insure <br /> minimum 1/2 full insulation depth behind or around all items. <br /> 3. Stuff loose insulation around door and window frames and other voids and penetrations. Do not allow any <br /> voids or gaps in the insulation envelope. <br /> C. Vapor Barrier <br /> 1. Install vapor barrier over inside face of framing at Insulation Type 7. Secure to framing with minimum <br /> penetrations. <br /> 2. Provide sufficient material at perimeter to lap over openings,framing,penetrations. <br /> 3. Lap and seal at all joints,penetrations and to adjacent surfaces and materials with specified tape. <br /> 3.02 CLEANING AND PROTECTION <br /> A. Protect insulation from damage until covering materials are installed. <br /> B. Remove accumulations of waste materials,excess insulation and containers and dispose of off site. <br /> END OF SECTION 07210 <br /> 07210-2 No.99132-CP2 <br />