Laserfiche WebLink
GROUT: Grout may be composed of mortar retempered with water. <br /> JOINTS: All joints exposed to the weather shall be tooled. All <br /> joints within the firebox shall not exceed 1/4" . <br /> CONSTRUCTION: When the bricks are being laid, they shall be <br /> sufficiently damp, and the mortar sufficiently soft, <br /> so that the mortar will remain plastic to permit the <br /> units to be leveled and plumbed immediately after <br /> being laid without losing bond. All masonry work <br /> shall be accurately executed and in conformity with <br /> the plans. No brick less than 1/2 length shall be <br /> used in exposed work. Head .and bed joints shall be <br /> solidly filled with mortar and brick shall be shoved <br /> into place. <br /> Fireplaces are generally of two types. One type is <br /> constructed on concrete slab floors and the other type <br /> is constructed in a frame floor using a cantilevered <br /> hearth. <br /> The generally accepted method of construction of a <br /> fireplace from the hearth up is as follows: the <br /> fireplace is laid out- the back of the fireplace is <br /> constructed to a scaffold height approximately five <br /> feet; and then the firebox is constructed and backfilled <br /> with tempered mortar. Do not grout solidly behind firebox <br /> wall to allow for expansion of firebox. <br /> Some fireboxes are constructed without the face, leaving <br /> ties so the face may be added at a later date, while <br /> other fireboxes are constructed simultaneously with <br /> the face. Either way is an approved method of <br /> construction. <br />