2017-01456 - in-building sprinkler system

Home Browse Search

Page 4 of 8 NIMICING® QUICK RESPONSE TECHNICAL DATA DRY HORIZONTAL SIDEWALL SPRINKLERS • The Viking Corporation,210 N Industrial Park Drive,Hastings MI 49058 Telephone:269-945-9501 Technical Services:877-384-5464 Fax:269-818-1680 Email:techsvcs@vikingcorp.com • • Sprinkler Base Thread Size Nominal Order Length Listings and Approvals4 Part No) SIN Style K-Factor° increment (Refer also to DesignCriteria on page 106e.) NPT BSP ® metric' Inches ® cULus5 NYC° VdS LPCB Egg la 08384U VK178 Adjustable 1° — 5.6 80.6 1/2" ® Al,A5 Al 0 -- 11.111111 16458U Standard — 25 mm ME 80.6 1/2" ® Al A5 — — as 08386U VK182 Adjustable 1" -- 80,6 1/4' 6.35 B2, B6 B2 1111 -- ©MI 16454U Recessed -- 25 mm 80.6 1/4" 6.35 B2,B6 -- a -- 111.111.111 0838816456U VK174 Plain Barrel 1" — 5.6 80.6 112" 12.7 A3 A4 _ �� 16456U -- 25 mm 0 80.6 1/2" ® A3 Approved Finishes and"A"Dimensions 1* -Chrome, or White Polyester'sprinkler with a Chrome, Brass, or White Polyester Sleeve and Escutcheon with"A"dimensions 1-1/2"to 45-1/2'(38.1 mm to 1,156 mm) Approved Temperature Ratings 2 -Chrome, or White Polyester'with "A"dimensions 3-1/4" to 47-1/2" (82.5 mm to 1,207 A-155°F(68°C), 175"F(79"C),200°F 3-Chrome,Brass,White Polyester',or ENT'with'A"dimensions 3"to 47"(76.2 mm to 1,194 mm) (93°C),and 286°F(141 °C) 4-Chrome or Brass with"A'dimensions 3"to 47"(76.2 mm to 1,194 mm) B-155 °F (68 °C), 175°F (79°C), and 5-ENT' 200°F(93°C) sprinkler with an ENT'Sleeve and Escutcheon with"A"dimensions 1-1/2"to 45-1/2"(38.1 mm to 1,156 mm) 6-ENT'with"A"dimensions 3-1/4"to 47-1/2"(82.5 mm to 1,207 mm) 'Brass Finish is listed and approved but not standard offering,lead times of 6-8 weeks required. (Matching Brass escutcheons are not available.) Footnotes 'Part number shown is the base part number.For complete part number,refer to current Viking price list schedule. 2 K-Factor applies for standard lengths("A"Dimensions indicated above). Metric K-factor shown is for use when pressure is measured in bar.When pressure is measured in kPa,divide the metric K-factor shown by 10.0. 'This chart shows the listings and approvals available at the time of printing.Other approvals may be in process.Check with the manufacturer for any additional approvals. 5 Listed by Underwriter's Laboratories for use in the U.S-and Canada for Light Hazard occupancies only. 6 Accepted for use,City of New York Department of Buildings,MEA Number 89-92-E,Vol.15. 'cULus Listed as corrosion resistant. NOTE:When using CPVC fittings with Viking dry sprinklers,use only new Nlbco Model 5012-S-BI tees.When selecting other CPVC fittings, contact Viking Technical Services. cULus Listing Reauirements: Quick Response Dry Horizontal Sidewall Sprinklers are cULus Listed as indicated in Approval Chart 1 for installation in accordance with the latest edi- tion of NFPA 13 for standard spray sprinklers. • Limited to Light Hazard occupancies only. • Protection areas and maximum spacing shall be in accordance with the tables provided in NFPA 13. • Minimum spacing allowed is 6 ft.(1.8 m). • Deflector must be positioned between 4"and 6"(102 mm and 152 mm)below the ceiling.Keep the top of the deflector oriented parallel with the ceiling. • Locate no less than 4"(102 mm)from end walls. • Maximum distance from end walls shalt be no more than one-half of the allowable distance between sprinklers.The distance shall be measured perpendicular to the wall. •The sprinkler installation and obstruction rules contained in NFPA 13 for sidewall standard spray sprinklers must be followed. IMPORTANT:Always refer to Bulletin Form No. F_091699-Care and Handling of Sprinklers.Also refer to page DRY1-3 for general care, installation, and maintenance information. Viking sprinklers are to be installed In accordance with the latest edition of Viking technical data,the appropriate standards of NFPA, LPCB,APSAD,VdS or other similar organizations,and also with the provisions of governmental codes,ordinances,and standards,whenever applicable. Form No. F_031993 Rev 15.1