Laserfiche WebLink
• <br /> • Page 5 of 8 <br /> ® QUICK RESPONSE <br /> TECHNICAL DATA DRY HORIZONTAL <br /> SIDEWALL SPRINKLERS <br /> The Viking Corporation,210 N Industrial Park Drive, Hastings MI 49058 <br /> Telephone:269-945-9501 Technical Services:877-384-5464 Fax:269-818-1680 Email:techsvcs@vikingcorp.com <br /> Sprinkler Base SIN S le Thread Size Nominal K-Factor2 Order Length Increment FM Approvals* <br /> Part No.' tyle NPT BSP U.S. metric' Inches mm (Refer also to Design criteria glow.) <br /> 08384U — 5.6 80.6 1/2" 12.7 Al <br /> VK178 Adjustable Standard <br /> 16458U a 25 mm — 80.6 1/2" 12.7 Al <br /> 08386U5.6 80.6 1/4" 6.35 B2 <br /> VK182 Adjustable Recessed <br /> 16454U 25 mm 80.6 1/4" 6.35 B2 <br /> 08388U - 5.6 80.6 1/2" 12.7 A3 <br /> 16456U VK174 Plain Barrel a 25 mm — 80.6 1/2" 12.7 A3 <br /> Approved Finishes and"A"Dimensions <br /> 1`-Bright Brass,Chrome,White Polyester,or ENT'with"A"dimensions 1-1/2"to 45-1/2"(38.1 <br /> Approved Temperature Ratings mm to 1,156 mm) <br /> A-155°F(68°C),175°F(79°C),200°F(93°C),and <br /> 2*-Bright Brass,Chrome,Me Polyester,or ENT'with"A"dimensions 3-1/4"to 47-1/2"(82.5 <br /> 2mm to 1,207 mm) <br /> 86°F(141 °C) <br /> B-155°F(68°C},175°F(79°C),and 200°F(93°C) 3-Brass,Bright Brass,Chrome,While Polyester,or ENT'"A"dimensions 3"to 47"(76.2 mm to <br /> 1,194 mm) <br /> 'Brass Finish is listed and approved but not standard offering,lead times of 6-8 weeks required. <br /> (Matching Brass escutcheons are not available.) <br /> Footnotes <br /> Part number shown is the base part number.For complete part number,refer to current Viking price list schedule. <br /> 2 K-Factor applies for standard lengths("A"Dimensions indicated above). <br /> 3 Metric K-factor shown is for use when pressure is measured in bar When pressure is measured in kPa,divide the metric K-factor shown by 10.0. <br /> 'This chart shows the FM Approvals available at the time of printing.Other approvals may be in process.Check with the manufacturer for <br /> any additional approvals. <br /> 5FM approved as corrosion resistant. <br /> NOTE:When using CPVC fittings with Viking dry sprinklers,use only new Nlbeo Model 5012.5-81 tees.When selecting other CPVC fittings, <br /> contact Viking Technical Services. <br /> FM Approval Requirements; <br /> The Dry HSW Sprinklers in the Approval Chart above are FM Approved as quick response Non-storage standard spray sprinklers as indicated in the <br /> FM Approval Guide.For specific application and installation requirements,reference the latest applicable FM Loss Prevention Data Sheets(including <br /> 2-0)and Technical Advisory Bulletins.FM Global Loss Prevention Data Sheets and Technical Advisory Bulletins contain guidelines relating to,but not <br /> limited to:minimum water supply requirements,hydraulic design,ceiling slope and obstructions,minimum and maximum allowable spacing,and deflec- <br /> tor distance below the ceiling. <br /> NOTE:The FM installation guidelines may differ from cULus and/or NFPA criteria. <br /> IMPORTANT:Always refer to Bulletin Form No.F_091699-Care and Handling of Sprinklers.Also refer to page DRY1-3 <br /> for general care,installation,and maintenance information.Viking sprinklers are to be installed in accordance with the <br /> latest edition of Viking technical data,the appropriate standards of NFPA,FM Global,LPCB,APSAD,VdS or other simi- <br /> lar organizations,and also with the provisions of governmental codes,ordinances,and standards,whenever applicable. <br /> Form No. F_031993 Rev 15.1 <br />