05-28-1985 Council Packet - Laserfiche WebLink

Home Browse Search

8.6.1 The Contractor shall furnish one copy, or stich additional copies as may be required by the Special Provisions, of complete Product Data for every manufacturered item of equipment and all components to be used in the Work, including specific performance data, material description, rating, capacity, working pressure, material gage or thickness, brand name, catalog number and general type. 8.6.2 This data shall be compiled by the Contractor and reviewed by the Engi- neer before any of the equipment is ordered. 8.6.3 All data shall he indexed according to specification section and para- graph for easy reference. 8.6.4 After review, this data shall become a part of the Contract, and may not be deviated from except upon written approval of the Engineer. 8.6.5 Product Data for equipment reviewed by the Fngineer does not in any case supersede the Contract Documents. The review by the Engineer shall not relieve the Contractor from responsibility for deviations from Drawings or Specifications unless he has in writing called the Engineer's attention to such deviations at the time of furnishing said data. Nor shall such review relieve the Contractor from responsibility for errors of any sort in the items furnished. The Contractor shall check the Work described by the Product Data with the Contract Documents for deviations and errors. 8.6.6 It shall be the responsibility of the Contractor to insure that items to be furnished fit the space available. He shall make necessary field measurements to ascertain space requirements, including those for connections, and shall order such sizes and shapes or equipment that the final installation shall suit the intent and meaning of the Drawings and Specifications. 8.6.7 Where equipment requiring different arrargement of connections from those shown is allowed, it shall hP the responsibility of the Contractor to install the equipment so as to allow for proper operation and in harmony with the intent of the Drawings and Specifications, and to make all changes in the work required by the different arrangement of connections. 8.6.8 Product Data shall be promptly submitted by the Contractor after he has reviewed, checked and approved the data to determine if they are in harmony with the requirements of the Project and with the provisions of the Contract . Documents and after he has verified all field measurements and construction riteria, materials, catalog numbers and similar data. In submitting the -)duct Data, the Contractor certifies that the work represented by the data .s been coordinated with tht Contract nocuments and all relevant field condi- ions. 8.7 QIIALITY OF EOPIPMENT AND MATERIALS • A.7.1 in order to e%t.ahligh standards of giality, the Engineer, in the Spec- ifications, has referred to c certain proAticts by narre and catalog number. This F -. I/AS - RSQSh ropy riRht 1' bonewtroo, Rosene, Anderlil A ♦a■nriaraa_ inc.