05-28-1985 Council Packet - Laserfiche WebLink

Home Browse Search

procedure is not to be construed as eliminating from competition other pro- ducts of equal or better quality by other manufacturers where fully suitable in design unless otherwise specifically stated in the Specifications (see Section 8.2 for substitution procedure). If a product referenced by catalogue name or number is no longer available, Contractor shall recotimend to Owner and Engineer another product of comparable quality. 9.7.2 The Contractor shall furnish the complete list of proposed desired sub- stitutions prior to executing the Agreement, together with such engineering and Product Data as the Engineer may require. 8.7.3 The Contractor shall abide by the Engineer's recommendation when pro- posed substitute materials or items of equipment are not recommended for in- stallation an-i shall furnish the specified material or item of equipment in such case. All proposals for substitutions shall be submitted in writing by the General Contractor and not by individual trades or material suppliers. The Engineer will review proposed substitutions and make his recotmendation in writing within a reasonable time. 9.8 SHOP DRAWINGS 8.8.1 The Contractor shall provide Shop Drawings, settings, schedules and such other drawings as may be necessary for the prosecution of the Work in the shop and in the field as required by the Drawings, Specifications or Engi- neer's instructions. Deviations from the Drawings and Specifications shall be called to th attention of the Engineer at the time of the first submission of Shop Drawings and other drawings for approval. The Engineer's review of any drawings shall not release the Contractor from responsibility for such devia- tions. 8.8.2 Shop Drawings shall be promptly submitted by the Contractor after he has reviewed, checked and approved the data to determine that they are in harmony with tiie requirements of the Project and with the provisions of the Contract Documents and afar he has verified all field measurements and con- struction criteria, mat- 9, catalog numbers and similar data. By submit- ting the Shop Drawings, Contractor certifies that the work represented by the Shop Drawings has been coordinated with the Contract Documents and all relevant field conditions. 8.8.3 Shop Drawings shall be submitted according to the following schedule: (a, Not less than three copies or such other number of copies as may be required by the Special Provisions shall be submitted with reasonable prompt- ness and in such sequence as to prevent delay of the Work. (h) The Engineer shall, within fourteen (14) days of the submittal of any Shop Drawings, return ono copy to the Contractor marked with Engineer's com- ments. (c) The ContricLor shall then promptly make any necet-saev corrections or changes to the Shop Drawings to conform to the comments made by the Enginee►. 29 1/85 - 8Sosh Copyright IyRs Bonestroo, Rosene, Andersik _`_AsEacia es. Inc.