02-11-1985 Council Packet - Laserfiche WebLink

Home Browse Search

4.11.3 Shop Drawings shall 1)P submitted according to the following schedule: (a) Three copies shall be submitted with reasonable promptness and in such sequence as to prevent delay of the Work. (b) The Engineer shall, within fourteen (14) da? the submittal of any Shop Drawings, return one copy to the Contractor market' with corrections and changes. (c) The Contractor shall then promptly correct the Sh,' Drawings to conform to the corrections and changes requested by the Engineer. (d) Following completion of such corrections and changes, the Contractor shall promptly furnish the Engineer two copies of the Shop Drawings conforming to the required corrections and changes. 4.11.4 Engineer will review with reasonable promptness Shop Drawings and samples, but Engineer's review shall be only for conformance with the design concept of the Project and for compliance with the information given in the Contract Documents and shall not extend to means, methods, sequences, techniques or procedures .,f construction or to safety precautions or programs incident thereto. The review of a separate item as such will not indicate review of the assembly in which the item functions. Contractor shall make any corrections required by Engineer and shall return the required number of corrected copies of Shop Drawings and resubmit new samples for review. Contractor shall direct specific attention in writing to revisions other than the corrections called for by Engineer on previous submittals. Contractor's stamp of approval on any Shop Drawing or Sample shall constitute a representation to Owner and Engineer that Contractor has either determined and verified all quantities, dimensions, field construction criteria, materials, catalog numbers, and similar data or assumes full responsibility for doing so, and that Contractor has reviewed or coordiiated ea�:.h Shop Drawing or sample with the requirements of the Work and the Contract Documents. 4.11.5 Where a Shop Drawing or sample is required by the Specificatio- no related Work shall be commenced until the submittal has been revie ed and approved by Engineer. 411.6 Engineer's review or approval of Shop Drawings or !-ampies shall not relieve Contractor from responsibility for any deviations from the. Contract Documents unless Contractor has in writing called Engineer's attention to such deviation at the time or submission and Engineer has given written concurrence and approval to the specific deviation, nor shall any concurrence or approval by Engineer relieve Contractor from responsibility for error* or omission,; in the Shop Drnwinga. 4.12 l!AL1,1 11F E ' 1 PMENT AND MATFR IAI.S 4,12.1 In ordri to f-stahliAli standard- of quality, the Engineer, in the SpHt- itications, has referred to certain products by nam« and catalog 152 ha 4/AI r ,tt.l