My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
1988-04-25 Resolution 2416
Orono
>
Property Files
>
Street Address
>
C
>
Cygnet Place
>
20 Cygnet Place - 04-117-23-22-0024
>
Resolutions
>
1988-04-25 Resolution 2416
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/26/2025 1:50:27 PM
Creation date
6/26/2025 1:38:36 PM
Metadata
Fields
Template:
x Address Old
House Number
20
Street Name
Cygnet
Street Type
Place
Address
20 Cygnet Place
PIN
0411723220024
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
13
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
41. Not less than 3 studs shall be installed at every corner of an exterior <br />wall, unless other approval by Building Official. Sec. 2517-g-2. <br />42. Studs in bearing and exterior walls shall be capped with double <br />plates, installed to provide over -lapping <tt corners and partitions. Sec. <br />2517-g-2. <br />43. End joints in double plats shall be offset a minimum of 48". Sec. <br />2517-g-2. <br />44. All exterior walls and main cross partitions shall be effectively and <br />thoroughly braced at each end, and at least every 25 feet in length. <br />Sec. 2517-g-3. <br />45. Foundation cripple walls shall be framed of studs not less insize than <br />the studding above with a minimum length of 14 inches, or shall be fr�.es <br />of solid blocking. Sec. 2517-g-4. <br />46. All headers or lintels shall have not less than 2" solid bearing a, <br />each end to the floor or bottom plats. Sec. 2517-g-5. <br />47. All stud partitions in the basement that are not covered on at least <br />one side with approved wall coverings shall be braced with 2" thick <br />bridging installed at mid -point of wall, and of the same width as the stud. <br />Sec. 2517-g-7. <br />48. Rafters shall be framed directly opposite each other at the ridge. <br />Ridge board shall be a minimum of 1" in thickness and not less in depth <br />than the cut end of the rafter. (2" larger than rafter) Sec. 2517-h-3. <br />49 All lumber, plywood, etc. shall be identified by the grade mark of an <br />apL.;roved agency. Sec. 2505. <br />50. In the one hour occupancy separation between a Group R and M <br />occupancy, the separtion may be limited to the installation of materials <br />approved for one hour fire resistive construction on the garage side and a <br />self -closing, tight -fitting solid wood door 1 3/8" in thickness will be <br />permitted. Sec. 503-d-4. <br />51. Fire stoppings shall be provided to cut off all concealed draft <br />openings (both vertical and horizontal). Sec. 2516-f. <br />LIFE, SAFETY, AND HEALTH <br />52. Every sleeping room below the fourth floor shall have at least one <br />window or exterior door approved for emergency exit. windows with a net <br />clear openable area of not less than 5.7 sq. ft. min. net clear opening <br />height 24" width 20", with a max. sill height above the floor of 48" shall <br />be deemed to meet this requirement. Sec. 1204. <br />NOTE: The minimum dimensions do not meet 5.7 sq. ft. <br />53. All habitable rooms shall have natural light provided by window, with <br />an area of not less than 8% of f loor area or min. of 8 sq. frt. Sec 1205. <br />(1/20 of the above small be openable or a min. of 5 sq. ft.) *Exception. A <br />
The URL can be used to link to this page
Your browser does not support the video tag.