08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

7 Opening door compartment dimensions shall be as follows: Width Height Compartment ahead rear wheels L1 27” 43-1/2” Compartment over rear wheels L2 43” 25-1/2” Compartment behind rear wheels L3 21” 43-1/2” Right (Passenger) Side Body Module There shall be a multi-compartment body module constructed from ½’’ polypropylene provided to form three (3) compartments on the curb side of the body. There shall be a single door compartment ahead of the rear wheels, a single door compartment over the rear wheels and a single door compartment behind the rear wheels. Width Height Depth Compartment ahead rear wheels R1 34” 54-1/2” 22-1/4” Compartment over rear wheels R2 45” 36-1/2” 22-1/4” Compartment behind rear wheels R3 25-1/2” 54-1/2” 22-1/4” Opening door compartment dimensions shall be as follows: Width Height Compartment ahead rear wheels R1 27” 43-1/2” Compartment over rear wheels R2 43” 25-1/2” Compartment behind rear wheels R3 27” 43-1/2” Transverse Compartment A transverse compartment will communicate at the top of the two compartments (L1 -R1) ahead rear wheels. The approximate compartment dimensions shall be 14” wide x 39” high with clear door opening of 12” wide x 29-3/16” high. Rear Storage Compartment One (1) integrated to the platform compartment with opening 5’’ high x 22’’ wide x 104’’ long for suction hose storage and folding ladders or pike poles. A flip down horizontally hinges door is furnished at the rear. The interior compartment is made from polished 3003-H14 alloy smooth plate. Steel frame underneath Drop-In-Unit shall not be acceptable. Compartment Doors Compartment doors shall be equipped with Amdor brand roll-up doors complete with the following features: • Door ajar switch • Two (2) LED Lumabar WHITE lights • Aluminum double wall slats with continuous ball & socket hinge joint and recessed slat seal • double wall reinforced bottom panel with stainless steel lift bar latching system • Reusable slat shoes with positive snap-in securement • One-piece aluminum door track / side frame, top gutter with non-marring seal, non- marring side seals, bottom seal, with all wear component material to be Type 6 Nylon. • Roll-up doors shall be anodized gray.