08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

6 Poly Body The poly body shall consist of a left and right sides module with doors. In addition, there shall be a formed metal header panel and threshold panel. These components shall be assembled to form the modular body and shall be supported by a steel sub frame weldment. All components of the body shall be bolted together to allow for easy replacement. Threaded inserts shall be installed into all blind mounting holes. All other fasteners shall be in stainless steel. Standard Features • Rust and corrosion free body module • Lightweight material allows for increased payload • Compartments constructed with ½” high impact resistant copolymer sheet • Modular construction offers easy replacement or repair of side packs Material The material used to construct the body side modules and doors shall be extruded copolymer polypropylene. Materials that deteriorate when exposed to sunlight, extreme weather or operational conditions shall not be used or shall have a means of protection against such conditions that will not prevent compliance with performance standards. Protective coatings that chip, crack, or scale with age or extremes of climatic conditions or by exposure to heat or cold shall not be used Body & Compartments Mounting All compartments shall be ventilated through an integrated positive pressure vent system allowing for movement of air between compartments. Vent outlet at the front of the side compartment modules shall provide a water-resistant entry and exit for air. The compartment floors shall be of sweep out design for easy cleaning and have provision for drainage of moisture. Compartments floors and shelves shall be covered with Plastic Tiles. The tiles shall be black with yellow angled leading edges. Left (Driver) Side Body Module There shall be a multi-compartment body module constructed from ½” polypropylene provided to form three (3) compartments on the left (driver) side of the body. There shall be a single door compartment ahead of the rear wheels, a single door compartment over the rear wheels and a single door compartment behind the rear wheels. Inside compartment dimensions shall be as follows: Width Height Depth Compartment ahead rear wheels L1 34” 54-1/2” 22-1/4” Compartment over rear wheels L2 45” 36-1/2” 22-1/4” Compartment behind rear wheels L3 25-1/2” 54-1/2” 22-1/4”