Laserfiche WebLink
<br /> <br />8 <br />Adjustable Shelf Tracking <br />Each compartment shall have four (4) aluminum tracks fastened to the interior sidewalls <br />to provide an adjustable mounting surface for shelving. <br /> <br />Six (6) Adjustable Shelves <br />There shall be six (6) adjustable shelving formed from .125 thick smooth aluminum sheet. <br />Each shelf shall be fastened to the tracking using four (4) adjustable shelf clips and <br />stainless-steel hardware. <br />The shelves location shall be: <br />One (1) in L1 One (1) in R1 <br />One (1) in L2 One (1) in R2 <br />One (1) in L3 One (1) in R3 <br /> <br />Two (2) Slide-Out Trays <br />Two (2) adjustable slide-out tray formed from .125 thick smooth aluminum sheet shall be <br />provided. The slide-out tray locations shall be determined at the pre-construction meeting. <br /> <br />Left (Driver) Side Storage Hose Tray <br />One (1) storage hose tray shall be supplied and installed on top of left (driver) side <br />compartment. <br /> <br />Dimensions of the storage tray shall be 110” long X 22-3/4” wide X 8” high. <br /> <br />Black canvas with snaps shall be installed on top of the storage tray along with rear <br />protective net. <br /> <br />The area shall be designed to prevent the accumulation of water and allow for ventilation <br />to aid in drying hose in the storage area. <br /> <br />Right (Passenger) Side Storage Hose Tray <br />One (1) storage hose tray shall be supplied and installed on top of right (passenger) side <br />compartment. <br /> <br />Dimensions of the storage tray shall be 110” long X 22-3/4’’ wide X 8” high. <br /> <br />Black canvas with snaps shall be installed on top of the storage tray along with rear <br />protective net. <br /> <br />The area shall be designed to prevent the accumulation of water and allow for ventilation <br />to aid in drying hose in the storage area. <br /> <br />Three (3) SCBA Wheel Well Bottle Storages <br />Three (3) SCBA bottle storages shall be installed above the rear wheel well. The shall <br />have One (1) on the left (driver) side of the polybody and Two (2) one the right (passenger) <br />side of the polybody, one (1) storage forward and one (1) backward of the rear wheels. <br />Each bottle storage shall have a polished aluminum hinged door with latch assembly. <br /> <br />Aluminum Fenderettes <br />The rear wheel wells shall be radius cut with polished aluminum fenderettes installed at <br />well opening. <br />