Laserfiche WebLink
100274.1 - 2-1/2" DISCHARGE -- REAR <br />One (1) 2-1/2" discharge shall be installed at the rear pump area, controlled by a quarter turn ball valve. The discharge shall <br />have 2-1/2" NH male hose threads. The discharge shall be equipped with 2-1/2" female x 1-1/2" chrome plated brass <br />reducer, 1-1/2" chrome cap and cable. <br />100456.1 - 1-1/2" PRE-CONNECT DISCHARGE -- TRANSVERSE HOSEBED <br />One (1) 1-1/2" pre-connect discharge shall be installed on the transverse hosebed, controlled by a quarter turn ball valve <br />with direct local control handle in pump area. The discharge shall have 1-1/2" NH male hose threads and label on the valve <br />control handle. <br />The valve shall be on the manifold, with a feed line to the transverse hose tray in front of the tank, above the large <br />transverse compartment. <br />100441.1 - FRONT OF BODY DISCHARGE (THROUGH THE TANK) <br />A 1.5" discharge shall be piped from the rear pump area to the front on the body. A 1.5" master control valve shall be <br />installed at the rear pump manifold area with direct control handle. Two (2) 1" valves shall be installed at the front of the <br />water tank. <br />100643.1 - HOSE REEL <br />One (1) Hannay aluminum hose reel shall be installed. The reel shall have leak proof ball bearing swing joint, adjustable <br />friction brake, electric 12 volt rewind and manual crank rewind provisions. <br />The reel shall be mounted above the water pump and plumbing, center of the rear flat-bed body. There shall be a custom <br />aluminum platform to support it. <br />100291.1 - REEL CAPACITY <br />Each hose reel shall have a capacity of 200 feet of hose. <br />100295.1 - HOSE REEL DISCHARGE <br />One (1) 1" discharge shall be piped from the fire pump to each hose reel with flexible high pressure hose. The quarter turn <br />ball valve shall be on manifold. <br />100302.1 - NOZZLE MOUNT <br />Each 1" flexible hose discharge shall have a nozzle bracket installed to hold the nozzles in place. <br />100297.1 - HOSE REEL HOSE <br />One (1) 150' foot length of 1" water hose shall be installed on the hose reel. The hose shall be equipped with NH threaded <br />couplings and have a 300 PSI working pressure. <br />100304.1 - HOSE REEL ROLLERS <br />Each hose reel shall be provided with a Hannay captive type four sided stainless steel roller assembly. <br />100424.1 - FOAM SYSTEM <br />A Trident Foamate ATP 1.0 foam proportioner shall be installed. The unit shall be adjustable, permitting various foam ratio <br />percentages to be deducted depending on the nozzles in use. It shall have a foam capacity of up to 400 gpm (1500 lpm). <br />Foam selection percentages between .1 and 1% shall be available. The foam system has been designed for simplicity of <br />operation and maintenance. A flush system shall be installed. <br />THE MAXIMUM PRESSURE IS 600 PSI <br />100225.1 - WATER TANK GAUGE <br />A Class 1 “Intelli-Tank" water tank level gauge shall be installed on pump panel. The tank level gauge shall indicate <br />the liquid level on an easy to read LED display and show increments of 1/8 tank. A pressure transducer mounted on the <br />outside of the tank in an easily accessible area. <br />100200.1 - WATER TANK SPECIFICATIONS <br />Skeeter Brush Trucks Page 9 07/21/2023