Laserfiche WebLink
Municode Page 4 of 4 <br /> Within the B and I districts, wall and monument signs are permitted subject to the <br /> following regulations: <br /> (1) B-1, B-2 and B-4:size. Within the B-1, B-2 and B-4 districts, the aggregate <br /> square footage of sign space per lot shall not exceed the sum of one square foot <br /> for each front foot of building, plus one square foot for each front foot of lot not <br /> occupied by a building. No individual sign shall exceed 50 square feet. <br /> (2) B-3: size. Within the B-3 district, the aggregate square footage of sign space per <br /> lot shall not exceed the sum of four square feet per front foot of building, plus <br /> one square foot per front foot of property not occupied by a building. No <br /> individual sign surface shall exceed 100 square feet. <br /> (3) 1:Within the I District, signs shall be permitted according to the regulations in <br /> section 78-832 <br /> (4) B-1, B-2 and B-4:height. Within the B-1, B-2 and B-4 districts, no sign shall <br /> extend in height more than two feet above the highest outside wall or parapet of <br /> any principal building, nor shall any sign be located closer than ten feet from any <br /> property line; except that any sign over ten square feet may project two feet into <br /> any required yard area from the principal building. <br /> (5) B-3 and l:height. Within any B-3 or I district, no sign shall extend in height more <br /> than six feet in height above the highest outside wall or parapet of any principal <br /> building. No sign shall be located closer than ten feet from any property line, <br /> except that any sign exceeding ten square feet may project only two feet into the <br /> yard area from any building. <br /> (Code 1984, § 10.61(3); Ord. No. 6 3rd series, §2, 4-26-2004; Ord. No. 32 3rd series, §5, 3-27-2006) <br /> Secs. 78-1469-78-1490. - Reserved. <br /> http://library.municode.com/print.aspx?h=&clientID=13094&HTMRequest=http%3 a%2f%... 6/5/2012 <br />