2012-00558 - sign - free standing monument

Home Browse Search

Municode I Page I of 1 Sec. 78-832. - Signage. (a) General provisions. All signs shall conform to the sign standards of section 78-1466 of the chapter. Signage within the I-Industrial District shall be limited to the following standards: Freestanding signs (Monument style only—No pylon signs allowed): (1) No more than one double sided freestanding sign allowed per lot or per building. (2) The sign area shall not exceed 100 square feet of space on each side. (3) The sign shall not exceed ten feet in height. (4) Freestanding signs shall be located so as not to be visible to traffic within the Highway 12/394 corridor. Wall signs: (1) Buildings within the I-Industrial District may have signs on any facade, whether or not such facade faces the public right-of-way. The total amount of wall signage for a building shall be limited to a square footage equal to five percent of the area of the facade or facades that face the public right-of-way. However, no individual facade shall have a signage area greater than five percent of that individual facade. (2) Wall signs on south-facing building facades adjacent to the Highway 12/394 corridor shall be limited to one sign not exceeding ten square feet for each business entrance along the south-facing wall. Such signs shall not be internally lit. Directional signs: (1) Directional signage needed for traffic circulation or pedestrian movement as approved by the city shall not count in the overall square footage calculations. (b) [Comprehensive sign plan.]When a single principal building is devoted to four or more industrial uses, a comprehensive sign plan for the entire structure shall be required. No permit shall be issued for an individual use except upon a determination that it is consistent with the approved comprehensive sign plan. (Ord. No. 32 3rd series, §2, 3-27-2006) http://library.municode.com/print.aspx?h=&clientID=13094&HTMRequest=http%3 a%2f%... 6/5/2012