1994-005102 - utility shed - Laserfiche WebLink

Home Browse Search

BACK BACK 7.SIDE WALL SIDING CUT LIST: . ]04 waferboard&T1-11:Cut 1-4'x8'into 2-4'x4'. 166 ifaferboard:Cut 2-4'x8'into 2-4'x6'. 2'x6' 4'x6' 4'x6' 10x6 T1-11:Cut 2-4'x8'into 2-4'x4'&2-2'x4'. 2'x8' 4'x8' 4'x8' 10x8 waferboard:No cutting required. Use 2-4'x8'. 10x8 T1-11:Cut 2-41x8'into 4-4'x4'. 10x10 waferboard:Cut 1-2'x8'into 2-2'x4'& use 2-4'x8'. 101x8' FRONT 10x10 T1-11:Cut 3-4'x8'into 4-4'x4'&2-2'x4'. BACK 10x12 waferboard:Cut 1-4'x8'into 2-4'x4'& use 2-4'x8'. 2'x2' 2W* 1 0x1 2 T1-11:Cut 3-4'x8'into 6-4'x4'. 2'x8' 4'x8' 4'x8' 10x14 waferboard:Cut 2-4'x8'into 2-4'x6'&use 2-4'x8'. 1 0x1 4 Ti-11:Cut 4-4'x8'into 6-4'x4'&2-2'x4'. 10x16 waferboard:No cutting required.Use 4-4'x8'. 2'x8' 4'x8' 4'x8' 10x16 T1-11:Cut 4-4'x8'into 8-4'x4'. 10'x14' FRONT j BACK 8. Set the prefabricated back wall into 101x1o' FRONTplace. The 2x6 on the bottom of the BACK 2'x8' 4'x8' 4'x8' Q back wall sits on the ends of the 3 TREATED RUNNERS(C).The middle 2'x4' 4'x8' x of the back wall must be tight against a the FLOOR SHEATHING.Nail the back m wall to the 2x6 FLOOR STRINGER A C ( ) with 3-16d nails on each side.Nail the C FLOOR SHEATHING to the back wall 2'x8' 4'x8' 4'x8' 2'x8' 4'x8' 4'x8' every 8". 10'x17 FRONT 101x18' FRONT 1 "S A 5.Chalk a line on the 2x6 FLilOR STRINGERS(A),2"from the bottom of the FLOOR STRINGER(A).Tack a 6d nail aboutevery 12"on the chalk line with the head of the nail sticking out about A 1".This tine will be used as a guide for the bottom edge of the side wall siding. 9A.T1-11 siding:Nail a 4'x4'piece on each side,with the overlapping edge of the siding even with the outside of the 2x3 on the back wall, with the bottom of the sheet on the nails on the chalk line on the 2x6 D FLOOR STRINGER(A).Nail only to the 2x3 on the back wall every 6" with 6d nails. D E 9B.Waferboard siding:Nail a 4'x8'(4'x4'on the 1 Ox4 barn&4'x6'on the 10x6 barn).on each side with the bottom of the sheet on the nails D D on the chalk line on the FLOOR STRINGER(A) and the edge even E with the outside of the 2x3 on the back wall.Nail only to the 2x3 on the back wall with 6d nails every 6". 6.Nail the JOIST HANGERS(D)with 4-6d nails,centered over 10.SIDE WALL& ROOF STRINGER CUT LIST: the"V"on the 2x3's on the front and back walls,and even with the 10'x4'-Cut 4-2x4x92 5/8"to 7-2x4x44 3/4". top of the 2x3's.Starting at the peak, measure down 22",place 10'x6'-Cut 7-2x4x92 5/8"to 5'8 3/4". this mark on each 2x3 on the back and front walls. Center the 10'x8'-Use 7-2x4x92 5/8. JOIST HANGER (E) on this mark. With the tips of the JOIST 10'x10'- Cut 7-2x4x10'to 9'8 3/4". HANGER(E) even with the TOP edge of the 2x3's,nail with 10'x12'- Cut 4-2x4x12'to 11'8 3/4"&3-2x6x12'to 11'8 3/4" (D). 4-6d nails.Bend over the nails that attach the trim boards on the 10'x14'-Cut 4-2x4x14'to 13'8 3/4"&3-2x6x14'to 13'8 3/4" (D). front wall and the door. 10'x16'-Cut 4-2x4x16'to 15'8 3/4"&3-2x6x16'to 15'8 3/4"(D).