|
�
<br /> DMSION O1 SUBMITTALS-Section 01300
<br /> '
<br /> 1.04 DEFINITIONS
<br /> ' A. Product Data
<br /> Product Data include standard printed information on materials, products and systems (sometimes
<br /> referred to as "catalog data"), such as the manufacturer's product specification and installation
<br /> ' inswctions, availability of colors and patterns, printed statements of compliance and
<br /> applicability, roughing-in diagrams and templates, product photographs, standard wiring diagrams,
<br /> performance curves and operational range diagrams, production or quality control inspection and
<br /> ' test reports, and certifications, produet operating and maintenance instructions and recommended
<br /> spare parts listing, printed product warranties, as applicable to the Work.
<br /> ' B. Shop Drawings
<br /> Shop drawings, as defined in the General Conditions, and as specified in individual work Sections
<br /> include,but are not necessarily limited to, custom-prepared technical data for this project, such as
<br /> fabrication and erection/installation (working) drawings, scheduled information, setting diagrams,
<br /> ' custom templates, measurements, special wiring diagrams, coordination drawings, individual
<br /> systems or equipment inspection and test reports including performance curves and certifications,
<br /> as applicable to the W ork.
<br /> ' C. Samples
<br /> Samples include both fabricated and unfabricated physical examples of materials, products and
<br /> units of work, such as manufactured or fabricated work, and as smaller portions of units of work,
<br /> ' small cuts, or containers of materials, color/texture/pattern swatches and range sets, specimens for
<br /> coordination of visual ef�'ect, graphic symbols and complete units of repetitively used products as
<br /> applicable to this Work.
<br /> ' 1.05 CONTRACTOR'S RESPONSIBILII'Y
<br /> ' A. The Contractor shall review, approve and submit to the Architect/Engineer, with reasonable
<br /> promptness and in such sequence as to cause no delay in the Work, shop drawings, product data
<br /> and samples, including those by Subcontractors, prior to submission to determine and verify the
<br /> following:
<br /> ' 1. Field Measurements
<br /> 2. Field Construction Criteria
<br /> 3. Catalog numbers and similar data
<br /> ' 4. Conformance with Specifications and Drawings
<br /> In submitting shop drawings, product data and samples, the Contractor represents that he has
<br /> determined and verified all field requirements, materials, catalog numbers and similar data and that he
<br /> ' has checked and coordinated the information contained within such submittals with the requirements
<br /> of the Work and of the Contract Documents.
<br /> ' The Contractor remains responsible for details, completeness and accuracy, far confirming, and
<br /> correlating all quantities and dimensions, for selection of fabrication process, and for techniques of
<br /> assembly relating to all submittals and for performing his/her work in a safe manner.
<br /> , B. The Contractor shall notify the Architect/Engineer in writing at the time of submission, of any
<br /> deviations in the submittals from requirements of the Contract Documents.
<br /> ' C. If the Contractor makes submittal for materials, products, or systems wluch in his/her opinion
<br /> exceeds the quality or quantity of that specified, and expects or assumes to be reimbursed as an
<br /> additional cost, the Contractor shall notify the Architect/Engineer of this occurrence in writing at
<br /> the time of submission.
<br /> ' 01300-3
<br /> �V1V��PINCOLINTY Orono Salt Swraee
<br /> March 22,2002 Project No.: 0031569 Coniract No.: 0751 R2
<br /> '
<br />
|