Laserfiche WebLink
" • P.211/212 <br /> • <br /> Professional <br /> fird7111.7.11"; Service industries, Inc. <br /> Pittsburgh Testing Laboratory Division <br /> TESTED FOR; Coveo•Pppk, Inc. <br /> PROJECT; Pool Cover Safety Tests <br /> ATTN: Kelly Ragsdale <br /> 66 East 5 South <br /> Sat Lake qy, Utah 84113 <br /> • <br /> • <br /> DATEAugust 18. 1893 <br /> OUR REPORT NO.: 706.30110401 <br /> On August 16, 1993, Professional Service industries was contacted by Cover-Pools, inc. and asked that <br /> PSI review ASTM Standard F 1346-91 to see If tests performed by PSI in May and June of 1980 meet <br /> the standard performance specification of ASTM F1348-91. The standard was <br /> revkavedperformed by PSI meet the requirements of ASTM F1346-91. The followingIs a . dabdy <br /> PSI <br /> to Cover Pools, Inc. are of Pool Cover Safety tests which meet the criteria of ASTM <br /> ASTM ES13). F1348-91 (formerly <br /> On May 31, 1990, a representative of Professional Service industries was at the Corporate Offices of <br /> Cover-Pools, Inc. located at.89 East 3335 South, Salt Lake City, Utah 84115, to perform <br /> safety <br /> requirements tests on Cover-Pools, Inc.,Save-T-Cover ii safety covers. The safety tests performed were <br /> • in accordance with ASTM ES 13, Emergency Standard Performance Specification for Safety Covers and <br /> Labeling Requirements for all covers for Swimming Pools, Spas and Hot Tubs. <br /> A 16'x 32'pool was located at,the Corporate Offices of Cover-Pools, Inc. The pool was equipped with <br /> an under track Cover-Pool safety cover and top track(universal)•Cover-Pool safety cover. The traddng <br /> systems were connected to a redwood deck, with the connections at two feet on center along the length <br /> of the deck. The safety cover fabric used.In the under track system had a physical property of 16.2 <br /> oz/sq. yd. The safety cover fabric used in the top track system had a physical property of 13.2 ox/sq. <br /> yd. . <br /> STATIC LOAD TEST <br /> The static load test was conducted on both Cover-Pool safety covers In accordance with <br /> section 9.1 of ASTM ES 13. The weights used were weighed using a calibrated scale <br /> which is traceable to the National Bureau of Standards. The three weights used each <br /> had an area of one square foot One weight weighed 51.0 lbs., one 210.1 lbs. and one <br /> 226.3 lbs. The total weight used for the static load tests was 487.4 lbs. Three points <br /> were tested for static load on each Cover-Pool safety cover. The locations of the three <br /> points are as follows: <br /> 4'from the end of the pool In the center. <br /> 10' from the end of the pool In the center and in the center of the pool. <br /> Both Cover-Pool safety covers met the performance requirements for the static load test <br /> as outlined in ASTM ES 13 section 7.1. <br /> • <br /> 2955 South West Temple Street • Sart Lake Ctty,UT 84115 • 801/484.8827 • Fax 801/487-3312 <br />