2001-P04186 - accessory structure

Home Browse Search

I SECTION 1 I Construction Considerations IWhile there are countless types of foundation systems Frost action, soil bearing capacity, loading factors, you can consider the following four(4)types of building uses, local codes and other factors will help Ifoundation systems most often used are: drilled pier, determine the best foundation system for you. vertical pier with spread footing, perimeter wall and NOTE: Remember to refer to your previously footing and the thick-edged floating slab. I supplied anchor bolt setting plan and column detail plan along with this assembly guide during erection. IAnchor bolts Anchor bolt template ■ I 0 0� ;� • - 4 . .d 0 o $ 4A 4 I , CM%) i , .4 0 splashboard IAnchor bolts , Figure 1-1 I 1 During the installation of your foundation, an easy way SPECIAL NOTE: to place your truss anchor bolts is with the use of a 1) Storage instructions are contained in your I truss template made of plywood as illustrated above. sheeting and roofing package. Follow these Secure plywood template to splashboard. Drill on the instructions carefully if you decide to store your template and locate the diameter holes for anchor building rather than to erect it immediately. I bolts according to anchor bolt setting plan 2) After cutting or drilling your sheeting, remember Install four(4) 1/2"anchor bolts, washers, and nuts to immediately remove any shavings in order to I into splashboard and two (2) anchor bolts into the prevent surface damage. template prior to concrete pour. Refer to anchor bolt setting plan for template anchor bolt size. Assure that 3) As in all construction projects, make sure that the two (2)template anchor bolts extend at least 2" -. Safety is your Number 1 concern and seek I above the template(Figure 1-1). advice or outside help with tasks you cannot perform safely. I I ICOD-96 3 0 Miracle Steel Structures,Inc. 1996.