2006-P10017 - new structure - Laserfiche WebLink

Home Browse Search

• REScheck Software Version 3.7.3 REScheck Inspection Checklist Date:06/20/06 Plan Review and Inspection Issues This list of items may be helpful for Plan Reviewers and Building Inspectors to use as a guide for enforcing the Minnesota Energy Code.The items apply to Group R,Division 3 Occupancies,one-and two-family residential dwellings.The items marked with apply only to detached one-and two-family residential dwellings. Plan Review Issues Foundation Inspection: ❑ Foundation wall insulation R-5 minimum. ❑ Foundation insulation extends from top of wall down to top of the footing. ❑ Exterior foundation insulation is covered by a protective coating finish. Concrete Slab or Under-Slab Inspection: ❑ Slab on grade perimeter insulation R-5 minimum. ❑ Slab insulation extends from top of slab to design frost line or top of footing. ❑ Floors over unheated space R-30 minimum. Windows/Doors/Skylights: ❑ Average U-value is 0.37 maximum for windows and glass doors(excludes foundation windows). ❑ Window U-values consistent with building plan and REScheck Certificate. ❑ Window and door areas consistent with building plan and REScheck Certificate. Mechanical Ventilation Issues: ❑ Residential mechanical ventilation system provides adequate ventilation per code requirements'. ❑ Furnace efficiency is consistent with REScheck Certificate or building plan. ❑ Protection against excessive depressurization is installed per code requirements'. Envelope Insulation for Plan Review: ❑ Interior basement insulation R-5 minimum(if no exterior insulation). ❑ Ceilings with attics R-38 minimum or consistent with building plan and REScheck Certificate. ❑ Wall framing and insulation level is consistent with building design and REScheck Certificate. Inspection Issues Concealed Insulation Framing and Sheathing: ❑ Wind wash barrier installed at attic edge. ❑ Exterior wall corners framed so that insulation can be installed after exterior sheathing is installed. ❑ Intersections of interior partition walls and exterior walls framed so that insulation can be installed between the partition and exterior sheathing after exterior sheathing is installed. ❑ Gaps between framing less than one-half inch are eliminated by securing framing together or are insulated at the time of assembly'. ❑ All penetrations between conditioned and unconditioned spaces made prior to framing inspection are sealed'. Interior Air Barrier: ❑ All fire stops are air sealed. Proeschel Residence Page 2 of 3