Laserfiche WebLink
BASIN INSTALLATION INSTRUCTIONS <br /> Step2 <br /> if the basiUTIONs not tied down during installation, <br /> Lifting of the basin may be done with a nylon or other <br /> rain or flood conditions may cause the basin to non-damaging type material sling. Do not wrap a chain <br /> float upward,causing damage to the basin or or steel cable around the basin as damage may result. <br /> basin connections. Do not attach lifting mechanism around discharge hub <br /> or electrical hub. <br /> A DANGER <br /> Basin System Handling: Risk of electrical shock or electrocution. May result <br /> Factory built basin systems must not be dropped, in serious injury or death or fire hazard. Failure to <br /> dragged, rolled,or handled with sharp objects. properly support electrical conduit, lines and <br /> Improper handling of basins may result in damage to connections may result in structural failure. Electrical <br /> the basin,damage to basin components,or leaks in connections may be damaged exposing live electrical <br /> the piping assemblies. <br /> connections. <br /> Step 1 Step 3 <br /> The pad under the basin, requires 4 to 6 inches of Lower the basin into excavation, position and level <br /> appropriate fill.The ideal basin pad is concrete in properly. Mount basin to base anchor bolts if an <br /> conjunction with anti-flotation tie-down studs. Basin anti-flotation tie-down kit is used. If basin is fiberglass, <br /> anti-flotation tie-down kits are available from Delta inspect basin and seal off any cuts or scratches to <br /> Environmental Products. If concrete pad is not used, prevent fiberglass deterioration. <br /> the aggregate must be compacted to a minimum <br /> 85%standard proctor density per ASTM D698,or <br /> as required by the Authority Having Jurisdiction. <br /> Concrete pad or aggregate surface must be leveled <br /> flat and free of voids to conform to the basin bottom. <br /> Basin bedding depth should be calculated such that <br /> the basin top will protrude 3"above the normal grade <br /> upon final installation. <br /> 05625-459-1 3 <br />