|
3. Floor Plans - each floor , qr,, level including basement- or .
<br /> foundation, decks , porches, garage or carport. Size, spacing, and
<br /> direction of floor and ceiling framing members, girders, beams,
<br /> and 19nnYe
<br /> columns and piers. Location and size of all windows
<br /> including manufacturers identification and documentation of window
<br /> acid door infiltration test data. Location and size of all permanently
<br /> installed cabinets, plumbing fixtures, heating, ventilation a11d air
<br /> conditioning equipment.
<br /> 4. Exterior Elevations - All sides of building showing windows,
<br /> doors, finished grades, exterior finish, depth of footings, foundation
<br /> walls, piers, finished floor elevations and type of materials.
<br /> 5. Details and Sections - a minimum of one section detail through
<br /> exterior wall for each type of construction proposed, showing
<br /> materials and dimensions of each member from footing to the highest
<br /> point of the roof. Details including calculations and stress diagrams
<br /> together with manufacturers specifications are required for all
<br /> trusses. Fireplaces, if proposed, must be detailed in plan and cross
<br /> section. Details and calculations are required for each critical
<br /> construction detail including beams, overhanging or cantilevered
<br /> joists, stairways,
<br /> balconies,
<br /> shopfeatures.
<br /> Provide window door schedules, drawings of sky lights, and
<br /> manufactured stairways.
<br /> 6. Information and Calculations - pertaining to thermal transmittance
<br /> values and resistance values of each proposed material are required
<br /> and may be shown either on plans or in specifications (see detailed
<br /> energy requirement sheet for complete listing of information).
<br /> 7. Mechanical Designs - complete cainlcuvlations,t ventilation, ails and speci-
<br /> humidification-
<br /> dehumidification,
<br /> umid f cation-
<br /> fications are required for each heating, en
<br /> dehumidification, and air conditi fig lation including heat
<br /> equipment ratings and
<br /> loss/heat gain calculation, design temperatures,
<br /> identification as to type, manufacturer and model. Data shall be
<br /> presented on form provided.
<br /> shall Identification
<br /> e of ationdef and specifications for
<br /> water heating equipment
<br /> 8. Scecifications - (required for commercial/industrial,of drawings and residential
<br /> ial
<br /> if applicable) may be separate or part
<br /> description of materials to be used, identified as to grade, species,
<br /> type, manufacturer, and conditions of use. If not included on plan,
<br /> specifications shall includ=ting data used in computationittance
<br /> calculations together with suFeo
<br /> 9. All applications for structures which require driveway cess or
<br /> or
<br /> involve a change in use of an existing access to a County highway
<br /> City road, must be accompanied by an access permit issued by the
<br /> Hennepin County Highway Department or Orono Public Works Department.
<br /> 10. For projects which will requvaluat on reportinstallation
<br /> and system design
<br /> sewage treatment system, a site a application.
<br /> must be submitted with the building permit
<br /> 2
<br />
|