2015-00379 - sprinkler system - Laserfiche WebLink

Home Browse Search

_.,_ •yna-FIow® - M-COAT® Submittal Data Sheet O High Strength Steel Pipe Dyna-Flow-M-COAT Specifications NPS Nominal I.D. Wt. Wt.(H20 Filled) CRR Dyna-Flow-M-Coate is the"original"high-strength lightwall sprinkler pipe. Dyna-Flow-M-Coat has outstanding hydraulic capabilities and is recognized as the In;mm In;mm Lbs/Ft;kg/m Lbs/Ft;kg/m Unthreaded most popular alternative to Schedule-10 pipe.Lightweight,easy to cut and easy to 1" 1.191 0.830 1.31 2.41 handle for installation,Dyna-Flow-M-Coat is a valuable addition to any fire 25 30.3 1.2 1.95 - protection system. 11/4" 1.536 1.059 1.87 1.55 32 39.0 1.6 2:78 ,„, ,., ® Additional Benefits 1/° 1.728 1.667 2.71 3.44 Lightweight and easy to install,resulting in more efficient use of your freight and labor 40 43.9 2.5 4.03 - dollars.Provides stability needed to comply with standard hanger spacing(15 ft O.C.) 2" 2.203 2.104 3.79 2.78 per NFPA.Available in standard lengths for your convenience,or can be ordered in 50 56.0 3.1 5.64 - custom lengths upon approval.Fast cutting and welding,as well as easy roll grooving 21/2" 2.703 2.564 5.10 1.60 and end preparation.Available in Factory roll grooved form for quicker shop turnaround. 65 68.7 3.8 7,59 - Clean,durable mill coating provides longer"shelf life"and acts as an excellent primer 3" 3.314 3.387 7.18 1.48 for custom paint applications. 75 84.2 5.0 10.69 - 4" 4.310 4.473 10.86 1.00 Superior Hydraulics With an inside diameter of up to 11%larger than Schedule 40 and up to 7%larger ® 41 44> than Schedulel0,Dyna-Flow-M-Coat pipe hydraulics are exceptional.Larger I.D.s .PP.,YI• enable Dyna-Flow-M-Coat,and related components,to be down-sized within the system,thus increasing the potential for job cost savings.For complete Hazen-Williams ® Specifications & Approvals charts,refer to"Dyna-Flow Hydraulic Data Tables." Dyna-Flow-M-Coat pipe is manufactured to meet ASTM A 795, U Coatings & Fabrication Type E Grade A,and are in compliance with NFPA-13 and NFPA-14. Dyna-Flow-M-Coat products are coated externally with an environmentally approved All sizes of Dyna Flow are UL Listed,FM Approved and ULC Listed. and specially formulated modified-acrylic or water-based coating.This durable,exterior Dyna-Flow-M-Coat is UUULC Listed for use with roll grooved, black coating is paintable and acts as an excellent primer that is resistant to weathering plain-end couplings,and welded joints for wet,dry,pre-action and and U.V.degradation from outdoor storage.Metallurgical properties provide excellent deluge systems.It is FM Approved for roll grooved,plain-ended,and fabrication characteristics for end prep finishes,welding and roll grooving.No special welded joints for wet systems.Refer to appropriate documentation process or equipment is needed for fabrication and installation. for up-to-date listing and approval information. The internal surface of all black Fire Sprinkler pipe up to 4.5000"in diameter shall be coated with Allied Tube&Conduit's"M-Coat"ID Coating. O American Made Manufactured at one of 3 U.S.Facilities and is available through distributors in the USA, Canada,Mexico,and Latin America. Project: Sprinkler Contractor: Date: Engineer: Specification Reference: System Type: Locations: Comments: 9®aIIied Customer Service: (800)882-5543 Fax: (800)659-7730 www.alliedtube-sprinkler.com • 16100 S Lathrop Ave • 11350 Norcom Rd. • 2525 N 27th Ave. TUBE&CONDUIT° Harvey,IL 60426 Philadelphia,PA 19154 Phoenix,AZ 85009 atkore ©2012 Atkore International,Inc.All Rights Reserved.STP-53-4M-1207