Laserfiche WebLink
27 <br /> EN <br /> I,I S <br /> €€ <br /> ,q •:x ` FIG.4 \, Q FIG.5 <br /> F. Reinstall glass inside the door frame. G. Reposition top and bottom retainers <br /> (FIG.4) using screws from in Step C). Ensure <br /> retainer is positioned correctly.(FIG.5) <br /> 6.3 SCREEN REPLACEMENT <br /> WARNING: Risk of injury! Removing the screen will result in the counter weight to be out of balance, <br /> this will cause the screen door to immediately rise after the frame is removed. <br /> NOTE: It is recommended to have two people assist in removing the screen frame from the appliance. <br /> A. Insert the handle and lift the screen slightly up tom <br /> remove the 2 screws on the bottom inside of the <br /> screen frame,see Figure 1. I <br /> B. Removing the screen will result in the screen door <br /> immediately rising, use caution.It is recommended to <br /> have another person assist in holding the screen door <br /> while the screen frame is removed. <br /> C. Remove the 10 top and bottom screws and the 6 side Ilkscrews,see Figure 2. 111111 <br /> •. <br /> ,D. Remove the screen from the frame and replace. I <br /> E. Reverse these steps to reinstall the screen frame onto the 141 <br /> appliance. ' <br /> F. If the screen door becomes unbalanced, refer to the r <br /> "BALANCE WEIGHT ADJUSTMENT"section. Al <br /> NOTE: Do not leave the doors slightly open.Ensure your <br /> counter weights are balanced and the doors close properly. . <br /> O <br /> O . e 4. <br /> FIG 2: o <br /> 1/415-1642/04.15.16 <br />