Laserfiche WebLink
' 3. Remove welding flux immediately. <br /> 4. Finish welds at exposed connections so that no roughness shows after finishing, and so that contours welded <br /> surfaces to match adjacent contours. <br /> 3.07 ADJUSTING <br /> A. Hanger Adjustment: Adjust hangers to distribute loads equally on attachments and to achieve indicated slope of <br /> pipe. <br /> B. Touch-Up Painting: Cleaning and touch-up painting of field welds,bolted connections, and abraded areas of the <br /> shop paint on miscellaneous metal is specified in Division 9 section"Painting"of these specifications. <br /> C. For galvanized surfaces clean welds bolted connections and abraded areas and apply galvanizing repair paint to <br /> comply with ASTM A 780. <br /> END OF SECTION 15140 <br /> ' 15140-5 No. [COMM] <br />