Laserfiche WebLink
6. Comply with applicable requirements of State Building Codes. <br /> 1.05 DELIVERY,STORAGE,AND HANDLING <br /> A. Handle condensing units and components carefully to prevent damage. Follow manufacturer's written instructions ' <br /> for rigging. Replace damaged condensing units or components. <br /> B. Store condensing units and components in clean dry place off the ground. Protect from weather,water,and physical ' <br /> damage. <br /> 1.06 SPECIAL PROJECT WARRANTY , <br /> A. Warranty on Motor/Compressor: Provide written warranty, signed by manufacturer, agreeing to replace/repair, <br /> within warranty period, motors/compressors with inadequate or defective materials and workmanship, including <br /> leakage,breakage, improper assembly, or failure to perform as required; provided manufacturer's instructions for ' <br /> handling,installing,protecting,and maintaining units have been adhered to during warranty period. Replacement is <br /> limited to component replacement only,and does not include labor for removal and reinstallation. <br /> 1. Warranty Period: 5 years from date of substantial completion. i <br /> PART 2: PRODUCTS ' <br /> 2.01 ACCEPTABLE MANUFACTURERS <br /> A. Manufacturers: Subject to compliance with requirements,manufacturers offering air-cooled condensing units which , <br /> may be incorporated in the work include the following: <br /> 1. Dunbam Bush. <br /> 2. Carrier Air Conditioning;Div of Carrier Corp. <br /> 3. McQuay Air Conditioning Group;McQuay Inc. <br /> 4. Trane(The)Co;Div American Standard Inc. , <br /> 5. York;Div of York International. <br /> 2.02 AIR COOLED CONDENSING UNITS ' <br /> A. General: factory-assembled and tested air-cooled condensing units,consisting of casing, compressors, condensers, <br /> coils, condenser fans and motors, and unit controls. Capacities and electrical characteristics are scheduled on the <br /> Drawings. <br /> B. Unit Casings: designed for outdoor installation and complete with weather protection for components and controls, <br /> and complete with removable panels for required access to compressors, controls, condenser fans, motors, and ' <br /> drives. Additional features include: <br /> 1. Steel, galvanized or zinc-coated, for exposed casing surfaces, treated and finished with manufacturer's <br /> standard paint coating; ' <br /> 2. Lifting lugs to facilitate rigging of units; <br /> 3. Factory-installed metal grilles for protection of condenser coil during shipping,installation,and operation; ' <br /> 4. Hinged and gasketed control panel door. <br /> 15670-2 No.99132-CP2 ' <br />