Laserfiche WebLink
C. Finish: Exposed metal parts shall be polished chrome plated, except components installed in a concealed location <br /> may be rough brass or unfinished. <br /> D. Water Closet Flushometers: Furnish with the following features. <br /> 1. Non-hold-open feature. <br /> 2. Screw driver angle stop with seat bumper and cap. <br /> 3. Metal oscillating handle actuation. <br /> 4. Wall and spud flanges. <br /> 5. Adjustable tailpiece. <br /> 6. Vacuum breaker connection. <br /> 7. Fumish flushometers with factory-set,field-adjustable water consumption per cycle: <br /> a. Consumption: 1.6 gallons per flushing cycle. <br /> E. Urinal Flushometers: Furnish with the following features. <br /> 1. Non-hold-open feature. <br /> 2. Screw driver angle stop with cap. <br /> 3. Metal oscillating handle actuation. <br /> 4. Wall and spud flanges. <br /> 5. Adjustable tailpiece. <br /> 6. Vacuum breaker connection. <br /> 7. Furnish flushometers with factory-set,field-adjustable water consumption per cycle: <br /> a. Consumption: 1.0 gallons per flushing cycle. <br /> 2.05 TOILET SEATS <br /> A. General: Provide toilet seats compatible with water closets,and of type,color,and features indicated. <br /> B. Toilet Seats: Heavy-duty, commercial/industrial type, elongated, open front, solid plastic, with self-sustaining <br /> check hinge,less cover. <br /> 2.06 PLUMBING FIXTURE SUPPORTS <br /> A. Supports: ASME A112.6.1M, categories and types as required for wall-hanging fixtures specified, and wall <br /> reinforcement. <br /> B. Support categories are: <br /> 1. Carriers: Supports for wall-hanging water closets and fixtures supported from wall construction. Water closet <br /> carriers shall have an additional faceplate and coupling when used for wide pipe spaces. Provide tiling frame <br /> or setting gage with carriers for wall-hanging water closets. Long barrel in vertical applications. <br /> 2. Chair Carriers: Supports with steel pipe uprights for wall-hanging fixtures. Urinal chair carriers shall have <br /> bottom bearing plates. <br /> 3. Chair Carriers,Heavy Duty: Supports with rectangular steel uprights for wall-hanging fixtures. <br /> 4. Reinforcement: 2-inch by 4-inch wood blocking between studs or 1/4-inch by 6-inch steel plates attached to <br /> studs,in wall construction,to secure floor-mounted and special fixtures to wall. <br /> C. Support Types: Provide support of category specified,of type having features required to match fixture. <br /> D. Provide supports specified as part of fixture description,in lieu of category and type requirements above. <br /> 15440-3 No.99132-CP2 <br />