Construction project manual-2000/Media center

Home Browse Search

DIVISION 1 GENERAL REQUIREMENTS 01045 - CUTTING AND PATCHING 1. WORK INCLUDED A. Refer to Section 01010 and 01500 for special requirements, protection, constraints, timing of work, scheduling of work, enclosures and similar requirements relating to this Section. B. This Section covers cutting, demolition, removal work, patching and restoration of work as necessary to accomplish and complete all work under the Contract, including any relocation or reuse of existing materials, equipment, systems, or other work, as well as the disposition of salvaged materials or debris. This Section applies to all work under the Contract, including general construction, mechanical and electrical work. C. Drawings generally indicate the extent of demolition, removals, relocations and cutting. The drawings shall not be construed as indicating all required work, nor indicating all conditions or details which might be encountered to accomplish the work of this Contract. The Contractor and his subcontractors shall examine the spaces themselves to determine the actual conditions and requirements. All removals, demolition, cutting, restoration, new installations and other work shall be accomplished to transform the existing spaces and conditions to the new conditions required under the Contract, as well as to accomplish all tie-in work of new to existing. D. It is the intent that unless specially shown on the general construction type drawings (i.e.; architectural and structural) and schedules, or in inherent in the work to be accomplished under the general construction work of the area, that the mechanical and electrical Contractors shall perform the demolition, cutting, removals, relocations, patching and restoration as will be required to accomplish the work under their contracts. All work shown or indicated on the general construction drawings and schedules shall be accomplished by the General Contractor. E. Except for general demolition of entire areas, it is the intent that at each area, or.space, the Contractor and each subcontractor shall make the removals, perform cutting or demolition and accomplish relocations of work normal to his trades (i.e., Mechanical Contractor removes or relocates piping, ductwork and similar; Electrical Contractor removes or relocates panelboards, conduit lighting and similar). At areas of general demolition of the entire spaces, the Mechanical and Electrical shall make removals of work normal to their trades or as may be called for, for reuse or relocation, make any relocations and cut- off, terminate, cap or otherwise discontinue services that will be abandoned or removed in the space. EXISTING ORONO MIDDLE SCHOOL-NEW MEDIA CENTER SECTION 01045 - 1 BID PACKAGE 1: GENERAL CONSTRUCTION,MECHANICAL&ELECTRICAL