Laserfiche WebLink
F. Install surface-mounted hardware items, complying with hardware manufacturer's instructions and template , <br /> requirements. <br /> G. Install joint sealers between framing and adjacent surfaces as indicated, to provide weathertight construction. <br /> Comply with requirements of Section 07900 for installation of joint sealers. <br /> H. Install glass as specified in Section 08800 and according to the framing manufacturer's printed instructions. <br /> 1. Install aluminum panels and flashing as shown on Drawings. <br /> 3.03 ADJUST AND CLEAN ' <br /> A. Adjust operating hardware to function properly without binding,and to close doors tightly. <br /> B. Clean completed systems inside and out,promptly after erection and after installation of glass and sealants,taking ' <br /> care to avoid damage to finishes. Remove excess sealants,dirt,and other substances from aluminum surfaces. <br /> C. Clean glass surfaces as specified elsewhere. , <br /> 3.04 FIELD QUALITY CONTROL <br /> A. Window Testing <br /> 1. The Owner will employ an independent testing agent to perform testing as follows: <br /> a. Windows to be field tested in accordance with AAMA 502-90, "Voluntary Specification for Field <br /> Testing of Windows and Sliding Glass Doors",using Testing Method A. <br /> b. Immediately test the first window installed and two additional windows after the completion of the ' <br /> project. Architect will identify locations. <br /> C. Air infiltration tests to be conducted at a uniform static test pressure of 6.24 psf. The maximum ' <br /> allowable rate of air leakage will not exceed.15 cfin per foot of sash crack length. <br /> d. Water penetration tests to be conducted at a static test pressure of 8 psf. ' <br /> e. For each test that fails,the Architect/Testing Agent will select two additional windows to be tested. All <br /> unsuccessful tests, both original and retest as well as additional windows to be tested due to an <br /> unsuccessful test will be paid by the Contractor by deduct change order. <br /> END OF SECTION 08521 , <br /> 08521-6 No.99132-CP2 <br />