Laserfiche WebLink
i <br /> 3. Faces: <br /> a. Species: Red oak <br /> b. Cut: Plain sliced. <br /> 4. Adhesives: Type 1,Hot Plate process-waterproof. <br /> 5. Construction: 5-ply. ' <br /> 6. Core: Particleboard or structural composite lumber. <br /> B. Solid Core Door(rated): <br /> 1. AWI Type: FD <br /> 2. Application: Labeled fire door. <br /> 3. Faces: Same as non-rated door. , <br /> 4. Core: High density mineral core laminated to both sides of 3/4"fire retardant plywood. <br /> 5. Reinforcing for Hardware: Fire retardant treated top rail and lockblocks for secure anchorage of hardware, i <br /> without thm bolts as noted in NWWDA I.S.I-A- 1997. <br /> 6. For 60 minute and greater rated doors installed in enclosed stairways, conform to maximum transmitted <br /> temperature end point of 450°as specified in UBC Standard No.43-2. <br /> 7. Provide factory primed rated astragals or metal edges as required by listing agency. ' <br /> 8. Provide intumescent fire and smoke material for fire rated openings as required by door and frame <br /> manufacturer to comply with UL l OC,UBC Test 7-2. <br /> 2.03 ACCESSORIES <br /> A. Glazing Beads: <br /> 1. Non-rated and 20 min. rated doors: Fabricate glazing beads from solid stock fire-retardant treated wood of <br /> species to match door face veneers. Finish to match door. Provide concealed metal glazing clips and fasteners <br /> as required to meet requirements for a 20 minute fire rating. <br /> 2. Rated fire doors: Install nationally recognized agency listed, prime painted, vision frame with concealed <br /> fasteners one side, countersunk tamper-proof fasteners other side, mitered and welded comers, Anemostat ' <br /> BFL-123 or equivalent product by other manufacturer. Provide for glass thicknesses as scheduled. <br /> 3. Add solid wood lock blocks at doors with flush cup pulls. <br /> 2.04 FABRICATION <br /> A. Openings: Cut,trim,and seal openings in doors at the factory. ' <br /> B. Prefitting: Fabricate and trim doors to size at factory to conform to hollow metal frames as shown on approved <br /> frame shop drawings and floor finishes as indicated in the finish schedule. <br /> C. Premachining: Make all mortises and cutouts required for hardware at the factory to conform to approved hardware <br /> schedules,hardware templates,and door frame shop drawings. <br /> 1 <br /> 08200-4 No.99132-CP2 <br />