Laserfiche WebLink
DIVISION 0 <br /> PROJECT IDENTIFICATION <br /> 00100-INSTRUCTIONS TO BIDDERS <br /> for conveying, distributing, and controlling those services or utilities; as well as <br /> insulation, wrappings, coatings, or other integral features of the lines or items <br /> conveying those lines. <br /> Any product or manufacturer used as basis of the specifications shall generally set the <br /> criteria. It shall be expressly understood that any other product or manufacturer listed <br /> in the specification or any addenda as acceptable will be acceptable provided they <br /> fully comply with the requirements and match the basic and essential criteria of the <br /> product used for base specification, including the level of workmanship quality, as <br /> determined by the Architect. For final acceptance for use in the work, the Architect <br /> shall have right to accept or reject proposed deviations. Should a proposed product be <br /> unable to meet requirements,the product shall not be used. <br /> Where two or more products are shown or specified,the bidder and Contractor has his <br /> option of which to use, provided the product proposed will meet all requirements of <br /> the specifications and the design criteria. The right is reserved by the Architect to <br /> accept or reject proposed deviations in design, function, construction or similar <br /> differences that will affect design intent or quality. <br /> For any same or like product for this Project, only one brand, manufacturer, source or <br /> type shall be used, as approved by Architect. <br /> For products specified or shown by describing proprietary items, model numbers, <br /> catalog numbers, manufacturers, trade names or similar reference, each bidder <br /> obligated himself to submit bids and accept awards of a contract based upon the use <br /> of such products. The reference is intended to establish the measure for the quality <br /> which has been determined as requisite and necessary for the Project. <br /> END OF SECTION 00100 <br /> EXISTING ORONO MIDDLE SCHOOL-NEW MEDIA CENTER SECTION 00100-7 <br /> BID PACKAGE 1: GENERAL CONSTRUCTION,MECHANICAL&ELECTRICAL <br />