2014-00683 - alarm system - Laserfiche WebLink

Home Browse Search

sheet 156-1380 for device limitations between isolator modules ACCESSORIES and isolator bases. F110: Retrofit flange to convert B210LP(A) to match the B710LP(A)profile,or to convert older high-profile bases to low- Agency Listings and Approvals profile. These listings and approvals apply to the modules specified in F110BP:Bulk pack of F110;package contains 15. this document. In some cases, certain modules or applications F210:Replacement flange for B210LP(A)base. may not be listed by certain approval agencies,or listing may be RA100Z(A):Remote LED annunciator.3—32 VDC.Mounts to a in process. Consult factory for latest listing status. U.S. single-gang electrical box. For use with B501(A) and • UL Listed:S1115. B210LP(A)bases only. • ULC Listed:S1115(FSP-851A,FSP-851 RA,FSP-851TA). SMB600:Surface mounting kit • MEA Listed:225-02-E. M02-04-00:Test magnet. • FM Approved. M02-09-00:Test magnet with telescoping handle. • CSFM:7272-0028:0206. Maryland State Fire Marshal:Permit#2122. XR26:Detector removal tool.Allows installation and/or removal • of detector heads from bases in high ceiling applications. • BSMI:C1313066760036. XP-4:Extension pole for XR26.Comes in three 5-foot(1.524 m) • CCCF:Certif.#2004081801000017(FSP-851 T) sections. Certif.#2004081801000016(FSP-851). • U.S. Coast Guard: 161.002/42/1 (NFS-640); 161.002/50/0 T55-127-010:Detector removal tool without pole. (NFS2-640/NFS-320/NFS-320C,excluding B210LP(A)). BCK-2008:Black detector covers for use with FSP-851(A)only; • Lloyd's Register: 11/600013 (NFS2-640/NFS-320/NFS- box of 10. 320C,excluding B210LP(A)). WCK-20OB: White detector covers for use with FSP-851(A) only;box of 10. Product Line Information NOTE:A"suffix indicates ULC Listed model. FS -651, Low-profile intelligent photoelectric sensor. Must be mounted to one of the bases listed below. FSP-851 A:Same as FSP-851 but with ULC listing. FSP-851T: Same as FSP-851 but includes a built-in 135°F (57°C)fixed-temperature thermal device. FSP-851 TA:Same as FSP-851T but with ULC listing. FISP-851R3 Low-profile intelligent photoelectric sensor, remote test capable.For use with DNRA/DNRW. FSP-851 RA: Same as FSP-851 R but with ULC listing. For use with DNRA. INTELLIGENT BASES NOTE:A"suffix indicates ULC Listed model. NOTE.For details on intelligent bases,see DN-60054. B210LP(A):Standard U.S.flanged low-profile mounting base. B210LPBP:Bulk pack of B21 OLP;package contains 10. B501(A):Standard European flangeless mounting base. 8501 BP:Bulk pack of B501;package contains 10. B200S(A): Intelligent, programmable sounder base capable of producing sound output in high or low volume with ANSI Tempo- ral 3, ANSI Temporal 4, continuous tone, marching tone, and custom tone. B200SR(A): Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Replaces 8501 BH series bases in retrofit applications. B224RB(A): Plug-in System Sensor relay base. Screw termi- nals: up to 14 AWG(2.0 mm2). Relay type: Form-C. Rating:2.0 A @ 30 VDC resistive;0.3 A @ 110 VDC inductive; 1.0 A 0 30 VDC inductive. A: Plug-in System Sensor Isolator detector base. -Notifier® and FlashScan® are registered trademarks of Honeywell 6224BI ( ) 9- Y International Inc. Maximum 25 devices between isolator bases. ©2011 by Honeywell International Inc.All rights reserved.Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. ISO 9001 We try to keep our product information up-to-date and accurate. We cannot coverall specific applications or anticipate all requirements. MRIM111111111MACTEH All specifications are subject to change without notice. W1 QUALITY SYSTEMS Made in the U.S.A. For more information,contact Notifier.Phone:(203)484-7161,FAX:(203)484-7118. www.notfier.com Page 2 of 2—DN-6935:13.12/08/2011