Laserfiche WebLink
NOTE:Ademco Contact ID must be used for independent zone Ordering Information <br /> reporting. <br /> UDACT: Universal Digital Alarm Communicator Transmitter. <br /> Type Mode Feature Includes operating and programming instructions, and mount- <br /> ing hardware. <br /> Ademco Contact ID format only) Use Type Mode to identify MCBL-7: DACT phone cord,7 ft(2.13 m)long(two required). <br /> reports to Central Station as: <br /> • Fire Alarm • Burglary ABS-BRB: Metal enclosure for externally mounting UDACT <br /> up to 6,000 ft./1828.8 m from host FACP. 9.94° H x 4.63°W x <br /> • Supervisory • 24 hour Non-Burglary 2.50°D(cm:25.248 H x 11.760 W x 6.350 D). <br /> • Pull Station • High Temperature UBS-1: Metal enclosure. Includes viewing window and <br /> • Heat Detector • Low Temperature optional relay mounting capability. <br /> • Waterflow • Low Water Pressure R-10E: SPDT Form-C relay. Contacts rated for 10 A @ 115 <br /> • Duct Detector • Low Water Level VAC.Connects to open collector relay driver. <br /> • Flame Sensor • Pump Failure R-20E: DPDT Two Form-C relays. Contacts rated for 10A <br /> • Smoke Zone 115 VAC.Connects to open collector relay driver. <br /> FBD-1: Ferrite bead kit.Use for remote mounting only. <br /> Electrical Specifications ROM1-UDACT: EPROM upgrade kit. <br /> Standby current:40 mA. <br /> Current while communicating:75 mA. <br /> Maximum current while communicating and with open collec- C) <br /> for output activated: 100 mA. CD ABS-8RB <br /> Voltage:Regulated 24 volts.Range:21.2 to 28.2 volts. C) o o for remote mounting <br /> [9.94"(25.2476cm)H x <br /> 4.63"(11.7602cm)W x <br /> 2.5"(6.35cm)D] <br /> m <br /> 0 <br /> m m <br /> 0 <br /> 0 0 <br /> 5� <br /> aesiw�.wmr <br /> UDACT <br /> P <br /> 0 <br /> UDACT <br /> shown in UBS-1 <br /> Page 2 of 4—dn-4867:b•03/27/09 <br />