2014-00683 - alarm system - Laserfiche WebLink

Home Browse Search

dn-4867:b•D-160 UDACT ° (,Universal Digital Alarm... NOTIFIER ;Communicator Transmitter by Honeywell Annunciator Control Systems General The Universal Digital Alarm Communicator Transmitter (UDACT) is designed for use on the Notifier NFS-320, NFS2- 640, NFS2-3030, NFS-640 and NFS-3030 Fire Alarm Control Panels and on the NCA-2 and NCA Network Control Annunci- 0° o OO po vAu,nmacmc ator. When used in conjunction with the NCA-2 network con- ®_a' PM trol annunciators the UDACT can report the status of all control O panels on NOTI•FIRE•NETTm. The UDACT transmits system ®a e status to UL listed Central Station Receivers via the public switched telephone network. �mo _ NOTE. The UDACT can also be used with legacy panels. Please refer to the UDACT manual for more information. ❑ ❑ F� The UDACT is compact in size and may be mounted externally in a separate cabinet. EIA-485 annunciator communications caw F--c F I MODE bus and regulated 24-volt connections are required. O O O 0 0 The UDACT is capable of transmitting the status of software 000M. Q zones(Alarm and Trouble),System Trouble,Panel Off-Normal, Supervisory, Bell Trouble, Low Battery, and AC Fail. The CDEKDOED UDACT is capable of transmitting all of the zone and point sta- El El 0 0 Q tus associated with each panel. o O o When the UDACT is used with the , NFS-3030, NFS2-3030, o J5 and NCA-2 it is capable of reporting up to 2,040 points. UDACT Reporting may be in the form of points or zones (refer to the UDACT manual for specific reporting parameters). The first 568 points transmitted may be programmed for a variety of types, including fire, waterflow, supervisory, etc. Remaining • Annunciation of UDACT Troubles including: loss of phone points transmitted are for fire alarm only lines,communication failure with either Central Station,total NOTE.Descriptions regarding point capacity,listed above,are forcommunications failure. receivers which receive in Ademco Contact ID format. See chart • Troubleshoot Mode converts keypad to DTMF touchpad. on page for compatible receivers. • Individual LEDs for: Power, EIA-485 Loss, Manual Test, Kissoff, Comm Fail, Primary Line Seize, Secondary Line Features Seize and Modem Communications. • Maximum of 14 point trouble messages transmitted per • Open Collector relay driver for Total Communications Fail- hour. ure or UDACT trouble. • Dual phone lines. • Real-time clock. • Dual telephone line voltage detect. • Extensive transient protection. • Surface Mount Technology. • Simple EIA-485 interface to host panel. • Compact in size:6.75°x 4.25°(17.145 x 10.795 cm). Agency Listings and Approvals • Built-in programmer. • Built-in 4-character red 7-segment LED display. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac- • Manual Test Report function. tory for latest listing status. • Manual Transmission Clear function. UL Listed:S635 • Mounts in a separate enclosure(ABS-8RB or UBS-1). . ULC Listed:CS100 Vol.VII • Communicates vital system status including: . MEA:328-94-E;317-01-E3 –Independent zone fire alarm. • CSFM: 7300-0028:174; 7165-0028:214; 7165-0028:224; –Independent zone non-fire alarm. 7170-0228:216; 7170-0028:223; 7165-0028:243, 7170- -Independent zone trouble. 0028:244 –Independent zone supervisory. • INDUSTRY CANADA:2132 6030 A –AC(mains)Power Loss(programmable). • FCC: 1 W6-USA-20723-AL-E –Low Battery and Earth Fault. • FM Approved –System Off-Normal. –12 or 24 hour test signal. Communication Formats –Abnormal Test Signal per new UL requirements. • 3+1 Standard •4+1 Standard •4+2 Standard –EIA-485 Communication Bus Failure. • 4+1 and 4+2 Ademco Express •Ademco Contact ID dn-4867:b•03/27/09—Page 1 of 4