Laserfiche WebLink
, E. Boxes - Cast <br /> ' 1. Oudet and juncdon boxes shall be of the weatherproof,galvanized cast,ferrous alloy type <br /> with ttmeaded hubs fa use with rigid steel conduit The boxes shall bear the U.L.label. <br /> ' PART 3: EXECUT'ION <br /> ' 3.01 UNDERGROUND WORK <br /> A. The Contractor shall be responsible for all excavating, concrete work where applicable, and <br /> , backfilling. The underground conduit shall be at least 30 inches below the finished grade. <br /> B. Backfill shall be earth or sand tamped inW place. 'It�e trench shall be filled to the top and the <br /> , s�rface restored to a finished condidoa. All excess earth shall be removed. <br /> 3.02 INSTALLATION <br /> � A. The Cont�actor shall furnish, install� wire and stert•up equipment as required by the contract <br /> documents. The manufacauer's installation recommendadons shall be observed and the <br /> , completed assembly shall meet applicable code requirements. <br /> 3.03 CONDUIT INSTALLATTON-RIGID STEEL <br /> ' A. Conduit nins shall not be smalla than 3/4". <br /> ' 3.04 CONDUCTOR INSTALLATION <br /> , A. Conductors shall be instalkd using industry accepted techniques as defined by Underwriter's <br /> Laboratories, National Electrical Code, NEMA, ICEA, and other applicable standards. The <br /> Contractor shall use approved pulling compound where applicable. <br /> ' B. No splices shall be mad�e in powa wiring except in junction boaes. Wiring shall be ternunated <br /> as roquired in the contract docaments. <br /> ' C. All wire and cable shall be testsd fa grounds and continuity before the circuit is enagized. The <br /> Conuactor shall assume full responsibility f� damage done to the equipment due to circuit <br /> , grounds or open circuits. <br /> 3.OS MOTOR CONNECTIONS <br /> ' A. Where tbe wiring system connects w the motor leads in the motor junction boxes,the connecdons <br /> shall be insulated with Raychem Type MCK,or�ual,motor connecdon insulation kits. <br /> , <br /> ' <br /> ' TS-5-2-3 <br /> � <br />