Laserfiche WebLink
� <br /> 3.3.8 Pum�Installation <br /> The Contracta shall install the pump in the well at the elevation directed by the Engineer in , <br /> accordat►ce with recommendadons of the pump manufacturer. Prior to placement,the Contracta <br /> shall assure p�+opa motor connection, impella adjustrnent, lubrication, and all other checks � <br /> mquirred for pump and mota. <br /> Pump installation includes fumishing and installing the PumP�a11 droP Pipe from the pump to the � <br /> surface plat�e.the surface plate,electrical conduit and junction box,power cable from the pump <br /> to S-feet above the snrface plate,and the discharge piping and related valves. The powe,r cable <br /> sl�sll be attached to the drop pipe by an approved method at a minimum of 10-foot intervals. � <br /> Adjusting the well casing height and welding a tlange at the top to match the sarface plate will <br /> also be included in pump installadon. � <br /> The drnp pipe shaU be assembled ro provide dght,leak hce joints. Tt�e submerged check valve, � <br /> if not an integcal part of the pump,shall be installed on discharge side of pump. <br /> 3.3.9 Starw � <br /> Following connecdon of the d.ischarge pipe and installation of electrical controls,the Cont�acta� <br /> shall allow for time W be present during pump startup. The Contractor shall prnvide to the � <br /> Owner all c�perating manuals and specificadons for the motor and pump,as specified previously <br /> in these Specifications. <br /> 3.3.10 Disinfectian and Samolina � <br /> Aft�all work on the well has been completed the Contractor shail disinfect and sample the well � <br /> in accordance with the requirements of the Minnesota Department of Health Water Well <br /> Construcaon Code, S 4725.6500 and 4725.6600. <br /> 3.3.11 Concrete Slab and Boa Cova ' <br /> The concrete slab shall be placod and po�ed araund the well casing as specified by the Engineer. � <br /> Installadon of the slab shall be coordinated with the installation of the discharge line to the wat� <br /> wwer. The discharge line will go through the slab (set other apprapriate secdons of these � <br /> Specifications). 1/Z-inch biduninous felt shall be placed around the well casing and discharge <br /> line W pamit movement during freezing and thawing. Temperature and shrinkage steel shall be <br /> placed at 12-inches on-center in the middle of the slab. � <br /> The 1/4-inch steel platsd box shall be anchored w the slab with Kwik bolts as specified. <br /> 3.4 METHOD OF MEASUREMENT AND PAYMENT I <br /> Payment for all the materials,equipment,and labor necessary tn construct the well and otherwise satisfy � <br /> the contract shall be made thcough the various bid items included in the proposal. Payment will be made <br /> TS-3-8 ' <br /> ' <br />