|
SICC EVALUATION
<br /> SERVICE Most Widely Accepted and Trusted
<br /> ICC-ES Evaluation Report ESR-1074
<br /> Reissued August 2016
<br /> This report is subject to renewal August 2018.
<br /> www.icc-es.org I (800)423-6587 I (562) 699-0543 A Subsidiary of the International Code Council®
<br /> DIVISION:06 00 00—WOOD, PLASTICS AND 3.0 DESCRIPTION
<br /> COMPOSITES AZEK® Trimboards Traditional, AZEK® Millwork, AZEK to
<br /> Section: 06 50 00—Structural Plastics Mill, AZEK® Trimboards Frontier Series, AZEK® Sheets
<br /> REPORT HOLDER: AZEK® Beadboard, AZE� Cornerboards, AZEK
<br /> Universal Skirt Board, AZEK Finish Grade Trim, AZEK®
<br /> CPG BUILDING PRODUCTS LLC Integrated Drip Edge, AZEK® Rabbeted Cornerboards,
<br /> 888 NORTH KEYSER AVENUE AZEK®Rabbeted Trimboards and AZEK Column Wrap are
<br /> SCRANTON, PENNSYLVANIA 18504 rigid cellular PVC solid cross sections installed as corner
<br /> (570)558-8000 boards,soffits, fascias, column wraps, door pilasters, frieze
<br /> w70)558-8000 boards, nonload-bearing rake boards, architectural
<br /> azek.com
<br /> infoaazek.com millwork, door trim, and window trim.
<br /> The material is expanded rigid poly-vinyl-chloride
<br /> EVALUATION SUBJECT: material with a small-cell micro structure. AZEK®
<br /> Trimboards Traditional are supplied with a smooth surface
<br /> AZEK®TRIMBOARDS TRADITIONAL,AZEK® on both sides. AZEK® Millwork is machined from AZEK
<br /> MILLWORK,AZEK TO MILL,AZEK®TRIMBOARDS Trimboards using common woodworking equipment. AZEK
<br /> FRONTIER SERIES,AZEK®SHEETS,AZEK® Trimboards Frontier Series are supplied with a textured
<br /> BEADBOARD,AZEK®CORNERBOARDS,AZEK® surface on one side and a smooth surface on the other.
<br /> UNIVERSAL SKIRT BOARD,AZEK®FINISH GRADE AZEK Trimboards Traditional and AZEK Trimboards
<br /> TRIM,AZEK®INTEGRATED DRIP EDGE,AZEK® Frontier Series are available in nominal widths of 4 inches
<br /> RABBETED CORNERBOARDS,AZEK®RABBETED to 16 inches and nominal thicknesses of 5/8, 4/4 , 5/4 and
<br /> TRIMBOARDS,AND AZEK COLUMN WRAP 6/4 inches. AZEK Sheets are available in 4-foot
<br /> (1.2 m) widths and in lengths of 8, 10, 12, 18 and 20 feet
<br /> 1.0 EVALUATION SCOPE 2.4 3.0, 3.6, 5.4 and 6.0 m), with actual thicknesses of,
<br /> Compliance with the following codes: 3/6, 1/2, 5/8, 3/4 and 11/4 inches (9.5, 12.7, 15.0, 19.1, 25.4
<br /> and 31.75 mm). AZEK Beadboards are available in two
<br /> • 2012, 2009, 2006 and 2003 International Building nominal sizes, 1/2 inch thick by 6 inches wide by 18 feet
<br /> Code®(IBC) long and 5/6 inch thick by 4 inches wide by 18 feet long.
<br /> AZEK Cornerboards are available in nominal thicknesses
<br /> • 2012, 2009, 2006 and 2003 International Residential of 6/4 and 5/4 inches, nominal outside-corner widths of
<br /> Code®(IRC) 4 and 6 inches, and in lengths of 10 and 20 feet. AZEK®
<br /> • 2013 Abu Dhabi International Building Code(ADIBC)t Universal Skirt Board is used to provide a transition
<br /> The ADIBC is based on the 2009 IBC.2009 IBC code sections referenced between siding and trim, and is a two piece product that
<br /> in this report are the same sections in the ADIBC. consists of a routed AZEK Trimboard with a 11/2-inch
<br /> (33.75 mm) nailing flange and 1/4-inch (6.35 mm)drip edge
<br /> Properties evaluated: overhang. The AZEK® Universal Skirt Board is available in
<br /> • Weather resistance a nominal thickness of 5/4 inches, nominal widths of 6
<br /> 8 and 10 inches, and a length of 18 feet (5.4 m). AZEK
<br /> • Termite resistance Integrated Drip Edge is used to assist in directing water
<br /> • Surface burning characteristics away from window and door surrounds and is a two-piece
<br /> product that consists of a routed AZEK Trimboard with a
<br /> • Structural—negative-transverse wind loads on soffits 11/4-inch (33.75 mm) nailing flange and 1/8-inch (3.18 mm)
<br /> 2.0 USES drip edge overhang. The AZEK Integrated Drip Edge is
<br /> available in a nominal thickness of /4 inches, nominal
<br /> AZEK® Trimboards Traditional, AZEK® Millwork, AZEK widths of 4 and 6 inches, and a length of 18 feet (5.4 m).
<br /> to Mill, AZEK® Trimboards Frontier Series, AZEK® AZEK® Finish Grade Trim is used to provide installation
<br /> Sheets, AZEK® Beadboard, AZEK® Cornerboards, AZEK® with hidden fasteners(a fastener-free trim surface)and is a
<br /> Universal Skirt Board, AZEK® Finish Grade Trim, AZEK® two-piece product consisting of a base trim piece and a
<br /> Integrated Drip Edge, AZEK® Rabbeted Cornerboards, cover trim piece. AZEK® Finish Grade Trim is available in
<br /> AZEK®Rabbeted Trimboards, and AZEK Column Wrap are an installed nominal thickness of 6/4 inches, nominal widths
<br /> used as nonload-bearing exterior trim. of 4 and 6 inches, and a length of 18 feet(5.4 m). AZEK®
<br /> ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed,nor are they to be construed ¢c
<br /> as an endorsement of the subject of the report or a recommendation for its use.There is no warranty by ICC Evaluation Service,LLC,express or implied,as
<br /> to any finding or other matter in this report,or as to any product covered by the report. moEmu�te[AMIpN
<br /> Copyright©2016 ICC Evaluation Service,LLC.All rights reserved. Page 1 of 2
<br />
|