Laserfiche WebLink
� <br /> SECTION 01300 <br /> SUBMITTALS <br /> 1.1 SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES <br /> A. Shop Drawings and Product Data shall be submitted to the General Contractor, for <br /> submission to the Architect or Engineer for their approval. The Shop Drawings <br />-- - shal�bear the General Contractor's stamp of approval, prior to being forwar�ied. <br /> B. Clearl identif Sho Drawin s and Product Data as to the Subcontractor, <br /> Y Y P g <br /> manufacturer, specification section and item submitted. <br /> C. Submit (1) reproducible and (1) copy of each Drawing, minimum. <br /> D. Upon review, the Architect will obtain prints of the reproducible for his record and <br /> will return the reproducible to the Subcontractor. The Subcontractor will correct the <br /> original Drawing as required, and resubmit if requested to do so. <br />��� ifi . The <br /> E. Submrt (4) copies of Product Data and samples, unless otherwise spec ed <br /> Architect will retain (2) copies, and (2) copies will be returned to the <br />'�� Subcontractor. <br />�� END OF SECTION <br />� <br /> �. <br /> � <br />� Division 1 -Section 01300 <br /> Page 1 of 1 <br />� <br />