Laserfiche WebLink
02830 Fences and Gates <br /> A. Provide materials for, and construct exterior fences and gates as shown on the Drawings and specified <br /> herein: <br /> 1. Work of this Section is by allowance—materials and quantities listed herein are for bidding purposes only. <br /> B. Fence Materiafs: <br /> 1. Chain Link Fencing and Gate: <br /> a. Framework, Fittings and Accessories: ASTM F 1083, standard weight (Schedule 40), Type I steel <br /> pipe, zinc coated, with polyvinyl chloride color(black) over-coat <br /> b. Fabric: ASTM A 392, Class 2a, 9 Ga. steel wire, woven in two inch (2") diamond mesh with top and <br /> bottom selvage knuckled, zinc coated, with polyvinyl chloride color(black) over-coat <br /> c. Gate Hardware: <br /> — Heavy duty, industrial grade, non-lift-off type, 180° swing, hot-dipped galvanized hinges, of size <br /> and material to suit gate size. Provide minimum (2) hinges per leaf <br /> — Latch: Forked type or plunger bar type latch for installation of Owner-furnished padlock. <br /> 2. Decorative Fencing: Verify material and design with the Architect. <br /> C. Fences and Gates: <br /> 1. Dog Enclosure: Construct 150 lineal feet of chain link fencing, 5'-0" high, with one (1) gate. Verify final <br /> layout design and location with the Architect. <br /> 2. Fencing Along Brown Road North: Construct approximately 175 lineal feet of decorative fencing between <br /> stone monuments. <br /> 633 SPECIFICATIONS <br /> Page 21 <br />