09-08-1986 Council Packet - Laserfiche WebLink

Home Browse Search

Zoning Files #1048 & 1049 September 4, 1986 Page 2 Setbacks The propooed structure meets all setbacks from property lines as follows: Existing Bldg. Proposed Bldg. Required Front 150' 825' 75' Side East 250' 270' 22.5' Side West 50' 500' 22.5' Rear 510' 420' 100' Parking: Parking has been provided for existing building. Additional parking is not required for proposed structure. Loading Facilities: The proposed accessory structure is designed as a loading facility and storage area, therefore, the following items have been reviewed pursuant to Orono Municipal Code Section 10.50, Subdivision 5 (H). 1. Amount Required - The existing structure has a loading faiclity which is located on the east side of the structure - its main purpose is for unloading raw materials and shipping finished materials. The proposed structure will be used for both loading of waste materials to be transported and unloading some raw materials. The addej loading facilities are needed for the operation of the principle use. 2. Design - The design of this type of use includes traffic patterns of the transport vehicles. The traffic pattern will be through the parking lot. The vehicles used to pick up waste are approximately 30' long and will cause no problems. 3. Location - The proposed facility is located at the rear of the principle structure and will not encroach on required set- backs. The berth is separated from off street parking by fence. Access: Access to the property is existing and will not change. Access to the proposed accessory structure is through the parking lot which is allowed by Orono Codes. Landscaping: In talking with Mr. Pallansch, the proposed structure will be cleaning up a storage area which has been an eye sore in the past, and correcting a past violation of the City Ordinance (Section 10.60, Subdivision 14 - Waste Materials). Exterior storage of pallets should be screened from the public.