02-11-1985 Council Packet - Laserfiche WebLink

Home Browse Search

After the sod has been placed, the sod shall he pressed into the underlying soil by rrlling or tamping. — 2575.3.7. Placing Erosion Mats: Erosion mats shall be installed in accordance wi h Mn DOT Spec met on 2575.3.C. 2575.3.A. Maintenance All sued placed under the contract shall he watered and maintained by the contractor until acceptance by the Engineer. Upon being placed, the sod shall he maintained for at least 30 growing days before final acceptance will be made. During the maintenance period, all sod which is presumed dead, damaged, or has become infected with weed= shall he replaced with new sod as directed by the Engineer. When so directed by the Fngineer, the contractor shall reseed anv areas on which the original seed has failed to grow. if mulching is required on the project, the reseeded area shall also be remulched. Until final acceptance of the work, all mair.tcnance and repair work shall be performed at the expense of the contractor, except that the additional seed and mulch material used for reseeding and remulching will he measured and paid for at the contract unit prices. 2575.3.9. Acceptance of Work: Seeding will generally be accepted by increment area upon satisfactory complet.on of the feeding and mulching and anchoring if specified. Acceptance of seeding will relieve the contractor of responsibility for maintenance except for reseeding and remulching as directed by the Fngineer. Upon satisfactory placement of the original sod, payment tar sud placed will be authorized At the contract unit price subject to retainage provisions of the Conditions of the Contract. Upon expiration of the sod maintenance period, the contractor shall immediately replace all presumed dead and damaged sod, or sod which has become infected with weeds. Areas replaced with new sod shall have the maintenance period extended by 20 days after replacement. Final payment shall not be made +rntil after the maintenance period or extended period and acceptance by the Engineer. 2575.4. METHOD OF MEASUREMEMT: 2975.4.1. Sped in&: Seeding will he measured by original area se,.ded. Areas req+tiring reseeding where the original seed has tailed to grow will not be added to the original measured area. 2575.4.2. Seed: All seed furnished and applied for both the original seeding and reseeding shall he measured by the weight nt each mixhire used. 357R,4.1. Mulch: Mulch materials will he measured svparat ely by weight of each type f�rniehpd and acceptshly applied mulch material us-•d in remulching will he measured by weight and Adfled to the m++lch +1,.+antitiem r+ttt.i.n.illy used. S/H4-.h7Na ropvright 1044 Roneatroo, Rosene. Anderlik : Associates, Inc.