Laserfiche WebLink
1Q7HS Microinverter <br />Commonly used module pairings' <br />Module compatibility <br />Maximum input DC voltage <br />Peak power tracking voltage <br />Operating range <br />Minimum/Maximum start voltage <br />Maximum input DC short-circuit current <br />Maximum module <br />s� <br />Overvoltage class DC port <br />DC port back -feed current <br />PV array configuration <br />Peak output power <br />Maximum continuous output power <br />Nominal (L-L) voltage/Range2 <br />Maximum continuous output current <br />Nominal frequency <br />Extended frequency range <br />AC short-circuit fault current over three <br />cycles <br />Maximum units per 20 A (L-L) branch <br />circuit' <br />Overvoltage class AC port <br />AC port back -feed current <br />Power factor setting <br />Power factor (adjustable) <br />CEC weighted efficiency <br />Ambient temperature range <br />Relative humidity range <br />DC connector type <br />Dimensions (H x W x D) <br />Weight <br />Cooling <br />Approved for wet locations <br />Pollution degree <br />W 320-460 <br />— 60-cell/120-half -cut-cell, 66-cell/132-half-cut-cell, and 72-cell/144-half -cut-cell PV modules <br />V 59 <br />V 38-43 <br />V 20-59 <br />V 30/59 <br />A 25 <br />A 20 <br />A 0 <br />1 x 1 ungrounded array; no additional DC side protection required; AC side protection requires <br />max. 20 A per branch circuit <br />VA 384 @ 240 VAC, 369 @ 208 VAC <br />VA 384 @ 240 VAC, 369 @ 208 VAC <br />V 240/211-264, 208/183-229 <br />1.60 A (240 V),1.77 A (208 V) <br />Hz 60 <br />Hz 47-68 <br />Arms 4.82 <br />10 (240 VAC), 9 (208 VAC) <br />— III <br />mA 18 <br />1.0 <br />0.85 leading... 0.85 lagging <br />97.0 @ 240 V, 96.5 @ 208 V <br />°C VF) <br />-40 to 60 (-40 to 140) <br />4 to 100 (condensing) <br />— <br />Staubli MC4 <br />mm (in) <br />212 (8.3) x 175 (6.9) x 30.2 (1.2) without bracket <br />kg (lb) <br />1.1 (2.4) <br />— <br />Natural convection —no fans <br />— <br />Yes <br />— <br />PD3 <br />Pairing PV modules with wattage above the limit may result in additional clipping losses. See the compatibility calculator at enphase.com/installers/microinverters/calculator. <br />z Nominal voltage range can be extended beyond nominal if required by the utility. <br />a Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area. <br />DSH-00562-1.0-EN-US-2024-08-02 <br />