Laserfiche WebLink
<br /> <br /> <br />20 _________ <br /> Initial <br /> <br />This pipe shall have a tee into the suction side of the pump and shall continue to the rear <br />of the truck for overboard suction. <br /> <br />The overboard suction connection shall have a 2-1/2" NST male adapter and a 2-1/2" <br />NST-F cap with retaining cable. <br /> <br />To draft, the tank to pump valve shall be closed, a suction hose connected to the <br />overboard suction connection and placed in a static water supply, and the primer <br />activated. <br /> <br />Tank to Pump “T” Handle Control <br />Attached to the handle of the fire grade tank to pump valve shall be a "T" handle control / <br />rod that shall extend to the end of the pump platform to allow for ease of use to open / <br />close the fire grade tank to pump valve. <br /> <br />Steel Discharge Piping <br />All piping shall be steel piping or high-pressure flexible hose. A 2.5" X 2.5" square steel <br />manifold shall be piped directly to the discharge outlet of the pump. Attached to this <br />discharge manifold, by means of welded steel pipe nipples, shall be all the discharge <br />valves. All piping shall be painted red to match the pump. <br /> <br />The discharge shall be equipped with a drain valve at the lowest point. <br /> <br />1" Tank Fill <br />There shall be a 1" valve piped from the discharge manifold as a means for refilling the <br />tank. The valve shall be a fire type quarter turn swing-out valve handle and 1" NPT <br />threads, and shall be connected to the tank fill port by 1" high pressure flexible hose. <br /> <br />One (1) 1-1/2" Discharge to Rear <br />There shall be one (1) 1.5" valve piped from the discharge manifold to the rear of the truck <br />for connection of forestry hose. The valve shall be a fire type quarter turn swing-out valve <br />with 1-1/2" NST threads. The valve shall be furnished with a 1-1/2" NST cap and chain. <br /> <br />One (1) 1" Discharge to Booster Reel <br />There shall be 1" valve piped from the discharge manifold to the booster reel. The valve <br />shall be a fire type quarter turn swing-out valve handle and 1" NPT threads and shall be <br />connected to the reel by 1" high pressure flexible hose. <br /> <br />One (1) Booster Hose Reel (R3) <br />One (1) 12v electric rewind booster hose reel model EF4018-17-18 capable of handling <br />35' of 1" diameter booster hose. The reel shall have a push button rewind control and a <br />backup geared crank rewind handle. The reel shall be equipped with a 1" NPT 90° swivel <br />inlet, and a 1" NST outlet riser. The reel shall be manufactured of steel and shall be primed <br />and painted red. The reel shall be installed into R3 Compartment. <br /> <br />High mounted roller and spool assemblies shall be furnished and installed on the reel. <br /> <br />35’ of 1” rubber booster hose shall be supplied and installed on the reel. <br /> <br />100’’ of 1’’ hose (shipped loose) <br />100’ of 1” rubber booster hose shall be supplied and shipped loose. The hose shall be <br />rolled and installed into the R3 compartment <br />187