08-10-1992 Council Packet - Laserfiche WebLink

Home Browse Search

:i 1.1 1.1.1 1.1.2 1.1.3 1.1.4 1.2 1.2.1 W: Floating Pier Specification Revision Copy December 1990 DESCRIPTION Work Included: Design, fabricate, install and furnish all plant, labor, equipment, supplies and materials and perform all operations required for installation of a complete, fully functional and operational floating pier system, including but not necessarily limited to head piers, finger piers, bridges, anchorages, and (Describe utilities and appurtenances included as part of the Floating Pier system, if applicable) all as indicated on the drawings and as specified herein. Contract Orawinos. The contract drawings are general in nature and show basic floating pier layout with required dimensions, required cleat and fender locations, and certain required materials and details of construction. The piers shown on the drawings are patterned after the type manufactured by _ _ _ _ _ _ _ _ _ _ _, of _ _ _ _ _ _ _ _ _ _. However, the intent is not to preclude other pier systems of different manufacture as long as they meet the required design loads, are within the range of required dimensions, are constructed with the specified materials, and are of a quality equal to or better than that specified in this Section. Fabrication. The contract drawings are not intended to be used for fabrication. The Contractor shall prepare and submit at least sets of drawings to the Engineer for approval prior to fabricating and installing the required pier system. Other Materials and Equipment. Other materials and equipment shall be as indicated on the Drawings, however, all other materials not specifically described but required for a complete and proper installation of the work under this Section, shall be new, first quality, and as selected by the Contractor subject to the approval of the Engineer. QUALITY ASSURANCE OF AN ACCEPTABLE FLOATING PIER SYSTEM Qualification of the Bidder: Each prospective bidder planning to submit a proposal for this project shall submit four copies of a pre-qualification package to the Engineer no later than_ _ _ _weeks prior to bid opening for the purpose of obtaining pre-bid qualifications of the floating pier system they manufacture including the anchorage system specified. It is the intent of prequalification for prospective bidders to provide the engineer with sufficient information to determine whether the requirements of these specifica tions as well as the project drawings can be met if the proposed floating pier system being evaluated is selected through the competi tive bidding process. A minimum of five (5) years of proven ex perience in floating pier system fabrication and installation is required. - 1 -