Laserfiche WebLink
<br /> <br />11 <br />DOT Lighting <br />Clearance, marker, license plate lights and reflectors will be furnished per D.O.T. <br /> <br />A pair of four (4) Whelen 600 series LED lamp modules shall be provided. Each module <br />shall include an emergency light, a stop light, a backup light and a turn light mounted in a <br />black plastic housing. <br /> <br />Two (2) LED Amber marker/clearance lights with black housing and clear lens will be <br />installed on the front side of the bed, one (1) each side. Two (2) LED Red <br />marker/clearance lights with black housing and clear lens will be installed on the rear side <br />of the bed, one (1) each side. Three (3) LED Red marker/clearance lights with black <br />housing and clear lens will be installed at the rear center of the bed. Amber & Red <br />reflectors shall be installed around the perimeter of the bed as per DOT requirement. <br /> <br />License plate light shall be an Eon light with black housing that has a light output <br />equivalent to a 10-watt halogen lamp. Eon light to have a 50,000 hr LED life. <br /> <br />Console <br />One CET fire application custom console installed between seats with rocker switch. To <br />be quickly identified and visible to the driver and passenger while seated, the rocker <br />switches shall be installed on the top face of the console designed with a 40° angle. This <br />area shall be able to hold at least two rows of rocker switch. All switches shall be <br />appropriately identified by panel mounted legends. <br /> <br />The first lighted rocker switch shall be a red Master Optical Warning switch. A master <br />body disconnect automatic switch, normally open contacts, shall be provided to disconnect <br />all electrical loads not provided by the chassis manufacturer. The starter solenoids shall <br />be connected directly to the batteries. <br /> <br />All rocker switches to have a green “On” indicator that is visible from the driver’s position <br />shall be provided. <br /> <br />The console has an area to accommodate department map books, clipboards etc. <br /> <br />The console has an area for one (1) radio heads & Siren installation. <br /> <br />All electrical components like breaker, relays, wiring etc. will be installed inside this <br />customized console and protected with an aluminium box. This console will be design to <br />easily gain access to those breakers, relays, wiring, etc. <br /> <br />Controls and switches that are expected to be operated by the driver while the apparatus <br />is in motion shall be within convenient reach for the driver. <br /> <br />Console shall be painted black scratch free Herculiner finish. <br />