08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

federal highway safety requirements. The vehicle is designed to meet NFPA 1906. Unless included in the specification, the customer will provide all the necessary equipment to comply with NFPA 1906 Section 10.2. 100365.1 - ROAD TEST A road test will be conducted with the apparatus fully loaded and a continuous run of no less than ten (10) miles. During that time the apparatus will show no loss of power nor will it overheat. The transmission drive shaft or shafts and the axles will run quietly and be free of abnormal vibration or noise. 100366.1 - APPARATUS WARRANTY SKEETER MANUFACTURED ITEMS A five (5) year parts and labor warranty on items manufactured by Skeeter Emergency Vehicles and a ten (10) year warranty on the structural integrity of the body. For warranty issues please contact your local dealer or Skeeter Brush Truck service center and request warranty from the service advisor at that location. 100369.1 - WATER TANK WARRANTY MANUFACTURER'S LIMITED WARRANTY AND NOTICE OF DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES- 10 YEAR EQUIVALENT. Manufacturer issues this limited warranty to the customer who is the original retail purchaser ("Customer") of a polypropylene tank (the "Tank") (10 to 4000) gallons. 100351.1 - PRE-CONSTRUCTION CONFERENCE, FACTORY A pre-construction conference shall be held at Skeeter Emergency Vehicles manufacturing facility in Hillsboro, Texas. The purpose of the conference is to review and clarify aspects of apparatus components and construction. It shall be attended by representatives of the purchasing department, the apparatus dealer, and Skeeter Emergency Vehicles. The transportation to this meeting shall be the responsibility of purchaser. 100651.1 - DRAWINGS There shall be design drawings submitted to the customer prior to the pre-construct conference. The CAD drawings shall include all sides of the apparatus. The customer shall agree to the drawings reflecting the correct apparatus design and layout prior to construction. 100353.1 - TERMS OF PAYMENT AND PREPAYMENT PROVISIONS Terms of payment for the specified vehicle shall be only cash or equivalent on delivery and acceptance for the unit. No bid will be considered which requires the purchaser to deposit with the bidder a down payment, prepayment of chassis, or any other such consideration as a condition of the bid. Such a requirement shall be grounds for immediate rejection of the bid. 204229.1 - FINAL INSPECTION, MANUFACTURING PLANT Representatives from the purchaser and the dealer shall be present at Skeeter's manufacturing facility in Hillsboro, Tx for the final inspection of the apparatus. A factory representative will assist the purchaser with review of the specifications to confirm they match the apparatus. Cost of transportation to and from the facility shall be the responsibility of the purchaser. *** NOTE, UNLESS PRIOR APPROVAL BY SKEETER BRUSH TRUCKS, FINAL INSPECTION AT THE PLANT IS MANDATORY *** 100356.1 - DEMONSTRATION AND FAMILIARIZATION OF APPARATUS The bidder shall demonstrate and familiarize the purchaser regarding the vehicle's operation. This shall include operation of chassis, major components, review of delivery information and documentation. This demonstration shall be completed at Skeeter Emergency Vehicles factory location in Hillsboro, Texas. 100358.1 - DELIVERY REQUIREMENTS The apparatus shall be picked up at the manufacturer's plant by the purchaser. Skeeter Brush Trucks Page 20 07/21/2023