08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

Location: 100324.1 - BACK-UP ALARM One (1) back up alarm shall be installed. 204292.1 - LOW VOLTAGE ELECTRICAL WARNING SYSTEM There shall be a low voltage warning system installed on the truck that will provide an audible and visual alarm indicating that the voltage is low. 204467.1 - WHELEN CORE CENCOM A Whelen CenCom Core system shall be provided. This system shall control the warning and scene lights as directed by the fire department. 932915.3 - MULTIPLEX SYSTEM An Intellitech Programmable Multiplex Control II (PMC II) system shall be installed on the apparatus for complete control of the electrical system devices. Configuration of the PMC II system shall be accomplished with the use of a personal computer running the Microsoft Windows operating system and PMC software. MULTIPLEX CPU One (1) Intellitec, 320 Channel CPU's shall be provided. 100313.1 - SIREN SPEAKER One (1) Whelen Model #SA315P Projector Series siren speaker shall be provided with bracket. The 100 watt siren speaker shall be designed in a black nylon composite housing with 123 decibel rating. Location shall be: Behind the front grille. 100311.1 - LIGHT BAR CAB ROOF MOUNT The cab mounted lightbar shall be equipped with an aluminum protective cage . The light bar shall be properly sealed and watertight. 100428.1 - LIGHTBAR A Whelen Freedom LED lightbar shall be mounted in front of the headache rack within the protection area of the headache rack. The length of the lightbar shall be 55". All the lenses shall be clear. The lightbar shall include the following: Two (2) red flashing forward facing LED modules. Two (2) blue flashing forward facing LED modules. Two (2) forward facing take down lights. Four (4) red flashing front corner LED modules. Two (2) red flashing rear facing LED modules. Four (4) blue flashing rear facing LED modules. Two (2) clear side alley LR11 LED modules. 100316.1 - NFPA WARNING LIGHTS ZONE A -- LOWER FRONT WARNING LIGHTS Two (2) Whelen M-6RC Series 4" x 6" warning lights shall be installed in the lower front area of the cab. The warning lights shall incorporate Linear-Super LED and Smart LED technology. Each lighthead shall have six (6) RED Super-LEDs with a clear non-optic polycarbonate lens for maximum light spread. Each lighthead assembly shall have internal flasher, eleven (11) Scan-Lock flash patterns, including steady burn and synchronize power functions. The lightheads shall have a conformal coated circuit board for moisture protection. The lights shall be mounted in a chrome plastic flange bezel assembly. COLOR: RED LED/CLEAR LENS ZONE B AND D -- INTERSECTION LIGHTS Two (2) Whelen M-6RC Series 4" x 6" warning lights shall be installed. The warning lights shall be installed in lower front bumper or cab fenders, one (1) each side, as far forward as possible. The warning lights shall incorporate Linear-Super LED Skeeter Brush Trucks Page 17 07/21/2023