08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

100457.1 - HOSE BED, TRANSVERSE -- FRONT OF TANK A hose storage bed shall be installed in front of the water tank. The dimensions shall be approximately: 12" wide, 12" high, and 96" long. The hose bed shall be constructed entirely of .125" aluminum on all exterior surfaces. The ends shall be open for hose deployment. A hose net shall be installed at both ends to protect the hose from accidental deployment. 204236.1 - COMPARTMENT HEIGHT UPGRADED TO 30" The compartments shall be increased in height from the 24" standard to the 30". Change the qty to reflect the number of compartments. Total number of compartments: 100544.1 - CUSTOM COMPARTMENT SHELVING A horizontal shelf with 1" lip shall be installed in the passenger's side compartment. There shall be a vertical divider in the passenger's side upper body compartment. It shall be installed under the horizontal shelf. 204342.1 - SCBA STORAGE, WHEEL-WELLS There shall be two (2) SCBA bottle storage tubes located in the wheel-well, one (1) each side of the body. There shall be an aluminum locking door securing the bottles. 100159.1 - UNDER BODY COMPARTMENT -- REAR CENTER An under body equipment storage compartment shall be installed under the flatbed surface located in the center rear of the apparatus. The compartment shall be between the vertical body beams, upper floor surface, and an aluminum lower floor area. The compartment shall be equipped with a hinged drop down door with dual latches installed. The floor shall be constructed of .190" aluminum. The exterior dimensions shall be approximately: 108" for a 114"L bed 120" for a 138"L bed 100166.1 - REAR SLIDE-OUT TRAY The rear center compartment shall be equipped with an .190" aluminum slide out tray on UHMW plastic slide pads and poly rollers. The tray shall be approximately 29" wide and full length of the compartment interior. 203821.1 - SLIDE OUT TOOL BOARD, TRANSVERSE There shall be two sections of PAC-TRAC mounted to the transverse slide-out tray. 100164.1 - DOOR AJAR LIGHT A "door ajar" warning light shall be installed on the center console. The light shall be flashing red LED light with a clear lens. The door ajar light shall be activated by door ajar switches installed on every compartment door. 100169.1 - HOSE TRAY -- DRIVERS SIDE A hose storage tray shall be installed over the driver's side equipment compartment, on the driver's side of the apparatus. The exterior dimensions shall be approximately: 16" wide, 8" high, and 72" long. The hose tray shall be constructed entirely of .125" aluminum on all exterior surfaces. The assembly shall be equipped with a hinged lift up aluminum door on top, enclosed front panel, and open rear area. There shall be a set of gas shocks installed on the lid of the tray to aid in opening and closing the tray in a safe manner. The hose tray shall be equipped with Turtle Tile floor covering. The actual door opening shall be approximately 3" smaller in dimension. 100382.1 - TOOL STORAGE TRAY/COMPARTMENT - PASSENGER SIDE A tool storage compartment shall be installed over the passenger's side equipment compartment, on the passenger's side of the apparatus. The exterior dimensions shall be approximately: 16" wide, 8" high, and 72" long. The compartment shall be Skeeter Brush Trucks Page 13 07/21/2023