Laserfiche WebLink
FILE i34.3034 <br />J><'y«.20C4 <br />P«0«3el3 <br />(6) Fill or excavated material must not be placed in a manner that creates an <br />unstable slope. <br />✓ The applicant has proposed a slope not to exceed 3 I <br />(7) Plans to place fill or excavated material on steep slopes must be reviessed <br />by the city engineer for continued slope stability and must not create <br />finished slopes of 30 percent or greater. <br />✓ The City Engineer. Tom Kellogg, has revicM ed the plans and has <br />made comments u hich are attached as Exhibit E <br />(8) Fill or excavated material must not be placed m bluff impact zones. <br />✓ The berm is not proposed in a blujf impact area. <br />(9) Any alterations below the ordinary high water level of public waters must <br />first be authorized by the commissioner of the Department of Natural <br />Resources under Minn. Stat. § 103G.245. <br />✓ Sol applicable <br />(10) Alterations of topography must only be allowed if they are accessoiy to <br />permitted or conditional uses and do not adversely affect adjacent or <br />nearby property. <br />✓ The berm \* ill not negatively impact aajacent or nearby properties <br />(11) Placement of natural rock riprap, including associated grading of the <br />shoreline and placement of a filter blanket, is permitted if the finished <br />slope does nut e.xceed three feet horizontal to one foot vertical, the <br />landward extent of the riprap is within ten feet of the ordinary high water <br />level, and the height of the riprap above the ordinary- high water level docs <br />not exceed three feet. A riprap permit shall be obtained per the <br />requirements of section 78-969. <br />✓ Sot applicable <br />Issues for Consideration <br />Are there any other issues or concerns with this application? <br />Staff Recommendation <br />Planning Staff recommends approval of the condition..! use permit with implementation <br />of the City Engineer ’s recommendations.